JVC GR-DV33 manual AC Charger Station

Page 76

76EN

CONTROLS,INDICATIONSANDCONNECTORS

(Cont.)

AC Charger Station

1

2 3

@

4 5 6 7 8

9

0

!

1DC charger (pg. 8)

Attach the battery pack to charge.

2Camcorder attachment part (pg. 53)

Attach the camcorder to this part when charging the battery installed in the camcorder or when editing.

3Multi connector (pg. 53)

The AC Charger Station can be connected with this camcorder through this connector. Never touch it with your hand or hit it with a hard object; if the pins are damaged, the connectors will become unusable due to contact failure.

4EDIT connector (pg. 61)

Using an editing cable, connect to the remote control or VCR.

5JLIP (Joint Level Interface Protocol) connector

Connect to a JLIP-compatible camcorder or VCR to control it from the computer using JLIP Player Pack (optional) etc.

NOTE:

Make sure that the camcorder is turned on while connecting the camcorder to a PC using the AC Charger Station’s JLIP connector. If the camcorder is turned off (because the Power Dial is set to “OFF” or due to Auto Shut Off* etc.) while the JLIP program software is used, it will be impossible to control the connected devices from the computer. In such a case, first try turning the camcorder on again, or unplug the JLIP connection cable from the AC Charger Station’s JLIP connector. Then, initialize or run the software again.

*Auto Shut Off:

If 5 minutes elapse in the Record-Standby mode or in the Pause mode, the camcorder’s power shuts off automatically to conserve energy.

6S-VIDEO OUT connector (pg. 54, 55, 61)

Outputs S-Video signal.

Connect to a video unit equipped with an S-Video connector.

7VIDEO OUT connector (pg. 54, 55, 61)

Connect to a TV or VCR using the VIDEO cable (provided).

8AUDIO OUT connector [L/R] (pg. 54, 55, 61)

Connect to a TV or VCR using the Audio cable(s) (provided).

9DC OUT jack (pg. 10)

Connect the DC cord (provided) and plug it into the camcorder.

0Lock lever (with release button) (pg. 53)

Slide the lock lever in the direction of the arrow to connect to the camcorder. To detach the camcorder, press the release button and slide the lock lever in the opposite direction of the arrow.

!Charger Indicator (for camcorder or battery) (pg. 8, 53)

Blinks during charging. When charging is finished, this indicator stops blinking and stays lit. When the camcorder is turned on, charging is interrupted.

@Power lamp

Image 76
Contents GR-DV33 Dear Customer It is recommended that youSafety Precautions DC cord AA-V60EGGrip/Hand strap VIDEO/AUDIO cableLithium battery CR2025 for remote control unit RM-V712U DVM-30 M-DV30MEVideo Area Audio Area Sub-Code AreaITI Insert and Tracking Information Area Contents Charging The Battery Pack Installing The Battery Pack Open Battery CoverInsert Charged Battery Close Battery CoverUsing The Battery Holder Supply Power to AC Charger StationIndoor Use Connect DC Cord to AC Charger StationDate/Time Settings Select Operation ModeInput Date and Time DisplayLoading/Unloading a Cassette Open Cassette CoverINSERT/REMOVE Tape To protect valuable recordingsSET Recording Mode Recording Mode SettingSelect Dial Adjust Length Grip Strap AttachmentAttach Grip Strap to Hand Strap Eyelet Attach Grip Strap to SUB Hand Strap EyeletDioptre Adjustment Adjust DioptreTripod Mounting Turn on CamcorderRemote Control Unit Installing The BatteryPull OUT Battery Holder Insert Battery in HolderOperation Mode Power Dial PositionSelf-Timer Playback Play FunctionStart Recording Stop RecordingEND Recording Select Dial IND.ON/OFF buttonTape Remaining Indicator Adjust BrightnessBrightness Control Viewfinder IndicationsRecording From The Middle Of a Tape Time Code When blank portion is recorded on a tapeProper recording EN Recording ZoomSelect Function Displaying The Date And Time During RecordingSelect Dial Menu button IND.ON/OFF button Engage 5S Mode Dissolves during 5 second mode recordingTo Take a Snapshot In The 5-Second Mode Scene 5-second recordingSelf-Timer Engage SELF-TIMER ModeStop SELF-TIMER Recording END SELF-TIMER RecordingAccess System Menu Select Snapshot ModeSnapshot Take SnapshotMotor Drive mode Menus Close Recording MenuRecording Menu allows you to set these functions Select Dial Menu button DisplayREC Mode Recording mode Wide ModeZoom Zoom magnification DIS Digital Image StabilizerSystem Menu Close System MenuPhoto Mode Accessmenu Manual Mode Item Access FADER/WIPE MenuTo Cancel FADE/WIPE Effects FADE/WIPE EffectsFades and Wipes Example WH Fader WhiteExample Wipe Scroll WH , BK , , B WResume Recording Picture Wipe/DissolveP and P of the Fader/Wipe Menu Random Variations Fader and Wipe Menu Fader and Wipe Menu RandomDisable P.AE/EFFECT AE/EffectsSlow Slow Shutter Manual Focus Adjustment Access Manual FocusAdjust Focus To Change To Auto FocusAdjust Exposure Exposure ControlBrightness control of the display To Return To Automatic Exposure ControlTo Return To Automatic Iris Control Iris LockIris White Balance Adjustment Accessment White Balance AdjustClosement White Balance Adjust To Return To Automatic White BalanceEnter Setting Exit Manual White Balance AdjustmentManual White Balance Operation To Change The Tint For RecordingDisplay Rewind TapeViewing Recording END PlaybackStill Playback To Perform High-Speed SearchPlayback Zoom Activate ZoomLocatescene Portion of Magnified END ZoomAccessmenu Playback Effect Select Playback EffectsAccess Playback Menu Playback MenuClose Menu Playback Menu allows you to set the following functionsDisplaying the Date During Playback Playback SoundDisplaying The Time Code During Playback Turn on Power VCR/TV Connection when connecting directly to the camcorderSelect TV’S Video Mode Confirm POWER-OFF Status VCR/TV Connection using AC Charger StationAttach and Lock Basic Connections Connect AC Charger Station to TV or VCR To DV in connector Connection To a Video Unit Equipped With a DV ConnectorDigital Printer Supply Power Attach Camcorder to AC Charger StationDubbing Make Connections Start PlaybackPause Recording Recording deckDigital Dubbing Make ConnectionsBrand Setting Operate VCRRandom Assemble Editing Execute FADE/WIPE in if NecessaryUSE P.AE/EFFECT if Necessary USE Fade Wipe on Scene Transition if NecessaryPress FADE/WIPE Start Editing Engagemode Vcrs RECORD-PAUSEStop Editing Prepare for R.A. Edit Play Back Dubbed Scene For More Accurate EditingChoose a Scene Input Correction Data Recording deck Select DialAudio Dubbing Find EDIT-IN Point Pause During DubbingStop Dubbing Engage Audio DUB StandbyRecording Sound Display Output Sound Troubleshooting Possible Causes Troubleshooting Phones connecto Viewfinder Camcorder’s functions Cleaning The Camcorder Remove Power SupplyClean Lens Clean ViewfinderCamcorder Power dial pg Zoom switch T/W pgOPEN/EJECT switch pg Bottom of camcorder Battery cover open switch Battery pgAC Charger Station Indications During Recording FunctionIndications During Playback Indications Function During use To avoid hazardStore cassettes For safety, do not Avoid using the unitDirty heads can cause the following problems Do not leave the unitVideo GeneralAudio Connectors Output powerVideo AudioColour temperature AC Charger StationAuto focus On-screen displayIndex Memo Memo GR-DV33

GR-DV33 specifications

The JVC GR-DV33 is a compact and versatile MiniDV camcorder that was designed with both amateur and semi-professional videographers in mind. Known for its unique blend of compact design and quality features, the GR-DV33 was a popular choice in the early 2000s, catering to users who sought portability without compromising on technology.

At the heart of the GR-DV33 is its 1/6-inch CCD sensor, delivering sharp and vibrant video quality with an impressive resolution. This camcorder supports a maximum recording resolution of 720x480, which, while modest by today's standards, was significant at the time for producing clear images and faithful colors in various lighting conditions.

One of the standout features of the JVC GR-DV33 is its advanced digital image stabilization technology. This technology minimizes the effects of shaky hands, ensuring smoother video playback, which is especially beneficial for outdoor and action shots. Users appreciated how this feature helped create more professionally looking videos without the need for bulky stabilizing equipment.

The GR-DV33 also incorporates a 20x optical zoom lens, which allows users to capture distant subjects with remarkable clarity. Coupled with a 100x digital zoom option, the camcorder enables users to explore creative angles and shots, from wide landscapes to close-up details. The built-in autofocus system further enhances usability, ensuring sharp focus on subjects even during dynamic shooting situations.

In terms of connectivity, the JVC GR-DV33 is equipped with various output options including USB and FireWire ports. This allows for easy transfer of footage to computers for editing or sharing online, making it a great option for budding filmmakers. Moreover, the camcorder features an LCD screen that can be flipped and turned to allow for flexible shooting angles, alongside an electronic viewfinder for traditional framing.

Another notable characteristic is the camcorder's low-light performance, enhanced by its NightAlive mode, which enables users to record in dim conditions while maintaining a usable level of quality. This feature is particularly appealing to users looking to capture events in poorly lit environments.

The JVC GR-DV33, while no longer cutting-edge, remains a testament to the era of MiniDV camcorders and is fondly remembered for its reliable performance and ease of use. Whether documenting family events, trips, or personal projects, this camcorder provides a solid foundation for capturing lasting memories with a straightforward and user-friendly design.