JVC GR-DV33 manual Loading/Unloading a Cassette, Open Cassette Cover, INSERT/REMOVE Tape

Page 12

12EN

GETTINGSTARTED(Cont.)

Loading/Unloading A Cassette

The camcorder needs to be powered up to load or eject a cassette.

OPEN/EJECT switch

Make sure the window side is facing out.

Cassette holder

Cassette cover

PUSH HERE

Erase protection switch**

1 OPEN CASSETTE COVER

Turn the power on, then slide the OPEN/EJECT switch in the direction of the arrow. The cassette cover releases. Open the cover in the direction of the arrow until it locks. The holder opens automatically.

• Do not touch internal components.

2 INSERT/REMOVE TAPE

Insert or remove a tape and press “PUSH HERE” to close the cassette holder.

•Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette cover.

•When the battery’s charge is low, you may not be able to close the cover. Do not apply force. Replace the battery with a fully charged one before continuing.

Approximate recording time

Tape

Recording mode

 

 

 

SP

LP

 

 

 

DVM-30

30 min.

45 min.

 

 

 

DVM-60

60 min.

90 min.

 

 

 

NOTES:

●It takes a few seconds for the cassette holder to open. Do not apply force.

●If you wait a few seconds and the cassette holder does not open, close the cassette cover and try again.

●When the camcorder is suddenly moved from a cold place to a warm environment, wait a short time before opening the cover.

●Closing the cassette cover before the cassette holder comes out may cause damage to the camcorder.

●Even when the camcorder is switched off, a cassette can be loaded or unloaded. After the cassette holder is closed with the camcorder switched off, however, it may not recede. It is recommended to turn the power on before loading or unloading.

●When shooting again after already shooting a scene, a blank portion is recorded on the tape or a previously recorded scene is erased (recorded over) if you open the cassette cover, regardless of whether the cassette holder comes out or not. See page 20 for information about recording from the middle of a tape.

** To protect valuable recordings . . .

.... slide the erase protection switch on the back of

the tape in the direction of “SAVE”. This prevents this tape from being recorded over. If you decide later that you do want to record on this tape, slide the switch back to “REC” before loading the tape.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents GR-DV33 Dear Customer It is recommended that youSafety Precautions DC cord AA-V60EGGrip/Hand strap VIDEO/AUDIO cableLithium battery CR2025 for remote control unit RM-V712U DVM-30 M-DV30MESub-Code Area Video Area Audio AreaITI Insert and Tracking Information Area Contents Charging The Battery Pack Installing The Battery Pack Open Battery CoverInsert Charged Battery Close Battery CoverUsing The Battery Holder Supply Power to AC Charger StationIndoor Use Connect DC Cord to AC Charger StationDate/Time Settings Select Operation ModeInput Date and Time DisplayLoading/Unloading a Cassette Open Cassette CoverINSERT/REMOVE Tape To protect valuable recordingsRecording Mode Setting SET Recording ModeSelect Dial Adjust Length Grip Strap AttachmentAttach Grip Strap to Hand Strap Eyelet Attach Grip Strap to SUB Hand Strap EyeletDioptre Adjustment Adjust DioptreTripod Mounting Turn on CamcorderRemote Control Unit Installing The BatteryPull OUT Battery Holder Insert Battery in HolderOperation Mode Power Dial PositionSelf-Timer Playback Play FunctionStart Recording Stop RecordingEND Recording Select Dial IND.ON/OFF buttonTape Remaining Indicator Adjust BrightnessBrightness Control Viewfinder IndicationsRecording From The Middle Of a Tape When blank portion is recorded on a tape Time CodeProper recording EN Recording ZoomDisplaying The Date And Time During Recording Select FunctionSelect Dial Menu button IND.ON/OFF button Engage 5S Mode Dissolves during 5 second mode recordingTo Take a Snapshot In The 5-Second Mode Scene 5-second recordingSelf-Timer Engage SELF-TIMER ModeStop SELF-TIMER Recording END SELF-TIMER RecordingAccess System Menu Select Snapshot ModeSnapshot Take SnapshotMotor Drive mode Menus Close Recording MenuRecording Menu allows you to set these functions Select Dial Menu button DisplayREC Mode Recording mode Wide ModeZoom Zoom magnification DIS Digital Image StabilizerSystem Menu Close System MenuPhoto Mode Accessmenu Manual Mode Item Access FADER/WIPE MenuTo Cancel FADE/WIPE Effects FADE/WIPE EffectsFades and Wipes Example WH Fader WhiteExample Wipe Scroll WH , BK , , B WPicture Wipe/Dissolve Resume RecordingP and P of the Fader/Wipe Menu Random Variations Fader and Wipe Menu Fader and Wipe Menu RandomDisable P.AE/EFFECT AE/EffectsSlow Slow Shutter Manual Focus Adjustment Access Manual FocusAdjust Focus To Change To Auto FocusAdjust Exposure Exposure ControlBrightness control of the display To Return To Automatic Exposure ControlIris Lock To Return To Automatic Iris ControlIris White Balance Adjustment Accessment White Balance AdjustClosement White Balance Adjust To Return To Automatic White BalanceEnter Setting Exit Manual White Balance AdjustmentManual White Balance Operation To Change The Tint For RecordingDisplay Rewind TapeViewing Recording END PlaybackStill Playback To Perform High-Speed SearchPlayback Zoom Activate ZoomLocatescene Portion of Magnified END ZoomAccessmenu Playback Effect Select Playback EffectsAccess Playback Menu Playback MenuClose Menu Playback Menu allows you to set the following functionsPlayback Sound Displaying the Date During PlaybackDisplaying The Time Code During Playback VCR/TV Connection when connecting directly to the camcorder Turn on PowerSelect TV’S Video Mode VCR/TV Connection using AC Charger Station Confirm POWER-OFF StatusAttach and Lock Basic Connections Connect AC Charger Station to TV or VCR Connection To a Video Unit Equipped With a DV Connector To DV in connectorDigital Printer Supply Power Attach Camcorder to AC Charger StationDubbing Make Connections Start PlaybackPause Recording Recording deckDigital Dubbing Make ConnectionsBrand Setting Operate VCRRandom Assemble Editing Execute FADE/WIPE in if NecessaryUSE Fade Wipe on Scene Transition if Necessary USE P.AE/EFFECT if NecessaryPress FADE/WIPE Engagemode Vcrs RECORD-PAUSE Start EditingStop Editing For More Accurate Editing Prepare for R.A. Edit Play Back Dubbed SceneChoose a Scene Input Correction Data Recording deck Select DialAudio Dubbing Find EDIT-IN Point Pause During DubbingStop Dubbing Engage Audio DUB StandbyRecording Sound Display Output Sound Troubleshooting Possible Causes Troubleshooting Phones connecto Viewfinder Camcorder’s functions Cleaning The Camcorder Remove Power SupplyClean Lens Clean ViewfinderCamcorder Power dial pg Zoom switch T/W pgOPEN/EJECT switch pg Bottom of camcorder Battery cover open switch Battery pgAC Charger Station Indications During Recording FunctionIndications During Playback Indications Function To avoid hazard During useStore cassettes For safety, do not Avoid using the unitDirty heads can cause the following problems Do not leave the unitGeneral VideoAudio Connectors Output powerVideo AudioColour temperature AC Charger StationAuto focus On-screen displayIndex Memo Memo GR-DV33

GR-DV33 specifications

The JVC GR-DV33 is a compact and versatile MiniDV camcorder that was designed with both amateur and semi-professional videographers in mind. Known for its unique blend of compact design and quality features, the GR-DV33 was a popular choice in the early 2000s, catering to users who sought portability without compromising on technology.

At the heart of the GR-DV33 is its 1/6-inch CCD sensor, delivering sharp and vibrant video quality with an impressive resolution. This camcorder supports a maximum recording resolution of 720x480, which, while modest by today's standards, was significant at the time for producing clear images and faithful colors in various lighting conditions.

One of the standout features of the JVC GR-DV33 is its advanced digital image stabilization technology. This technology minimizes the effects of shaky hands, ensuring smoother video playback, which is especially beneficial for outdoor and action shots. Users appreciated how this feature helped create more professionally looking videos without the need for bulky stabilizing equipment.

The GR-DV33 also incorporates a 20x optical zoom lens, which allows users to capture distant subjects with remarkable clarity. Coupled with a 100x digital zoom option, the camcorder enables users to explore creative angles and shots, from wide landscapes to close-up details. The built-in autofocus system further enhances usability, ensuring sharp focus on subjects even during dynamic shooting situations.

In terms of connectivity, the JVC GR-DV33 is equipped with various output options including USB and FireWire ports. This allows for easy transfer of footage to computers for editing or sharing online, making it a great option for budding filmmakers. Moreover, the camcorder features an LCD screen that can be flipped and turned to allow for flexible shooting angles, alongside an electronic viewfinder for traditional framing.

Another notable characteristic is the camcorder's low-light performance, enhanced by its NightAlive mode, which enables users to record in dim conditions while maintaining a usable level of quality. This feature is particularly appealing to users looking to capture events in poorly lit environments.

The JVC GR-DV33, while no longer cutting-edge, remains a testament to the era of MiniDV camcorders and is fondly remembered for its reliable performance and ease of use. Whether documenting family events, trips, or personal projects, this camcorder provides a solid foundation for capturing lasting memories with a straightforward and user-friendly design.
Top Page Image Contents