JVC GR-D850 GR-D870 instruction manual Computer, Using DV cable, DV connector USB connector

42 EN Connections/Editing

Connection To A Personal

Computer

DV connector

USB connector

[A] [B]

USB Cable
(provided)	Core filter
To USB
connector	DV cable
	(optional)
or
To DV	Core filter
Connector
PC with DV connector

When connecting the camcorder to a PC using a DV cable, make sure to follow the procedure below. Connecting the cable incorrectly may cause malfunctions to the camcorder and/or the PC.

•Connect the DV cable fi rst to the PC, and then to the camcorder.

•Connect the DV cable (plugs) correctly according to the shape of the DV connector.

[A] Using USB cable

It is possible to transfer still images stored on a memory card to a PC.

[B] Using DV cable

It is also possible to transfer still/moving images to a PC with a DV connector by using

the provided software, software equipped with the PC or commercially available software. If you are using a Windows® XP, you can use Windows® Messenger to conduct video conferences over the Internet, using a camcorder. For details, refer to the help for the Windows® Messenger.

Notes:

• Refer to “SOFTWARE INSTALLATION AND USB CONNECTION GUIDE” for the bundled software and drivers.

•It is recommended to use the AC Adapter as the power supply instead of the battery pack ( 16).

• Never connect the USB cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

•When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC.

• If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.

•The date/time information cannot be captured into the PC.

•Refer to the instruction manuals of the PC and Software.

• The still images can also be transferred to a PC with a DV connector- equipped capture board.

•The system may not work properly depending on the PC or capture board you are using.

•If, after connecting a DV cable to the camcorder and it doesn’t work, restart the camcorder.

• Do not remove memory card during USB connection between PC and set.

“USB” and/or “ ” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a fi le to the PC.

NEVER disconnect the USB cable

while “ ” is displayed on the LCD monitor since this can result in product damage.