20 EN Recording & Playback
Auto/Manual Mode
Press AUTO button repeatedly to switch to auto/manual recording mode. When manual mode is selected, the indicator “M” appears on the LCD monitor.
Auto Mode : A
You can record using no special effects or manual adjustments.
Manual Mode : M
Recording is possible by setting various functions manually.
!54/ 
-!.5!,
“00:00:00”. To prevent this, perform Recording From The Middle Of A Tape ( 20) in the following cases;
•When shooting again after playing back a recorded tape.
•When power shuts off during shooting.
•When a tape is removed and
•When shooting using a partially recorded tape.
•When shooting again after shooting a scene then opening/closing the cassette holder cover.
Notes:
•The time code cannot be reset.
•During
•The time code is displayed only when “TIME CODE” is set to “ON”. ( 31)
Time Code
During recording, a time code is recorded on the tape. This code is to confi rm the location of the recorded scene on the tape during playback.
|
|
|
| Display | |
Seconds |
|
|
|
| Frames* |
|
|
|
| (30 frames | |
|
|
|
| ||
Minutes |
|
|
|
| = 1 second) |
|
|
|
| ||
|
| 12:34:24 |
| ||
*Frames are not displayed during recording. Recording Start Point
Recording portion
Recorded tape
1 2 3 4 | Blank portion |
|
1, 3 & 4, time code begins counting from “00:00:00” (minute:second:frame).
2, time code continues from the last time code number.
If during recording a blank portion is left partway through the tape, the time code is interrupted. When recording is resumed, the time code starts counting up again from
Recording From The Middle Of A Tape
1Play back a tape or use Blank Search
( 22) to fi nd the spot at which you want to start recording, then engage the Still Playback mode ( 21).
2Set the Power Switch to “REC” ( 13), then start recording.