JVC GR-D74 manual Normal Playback, Shuttle Search, Blank Search, Still Playback

14 EN VIDEO PLAYBACK
MMENU/VOL.	Shuttle Search
BLANK SEARCH	Allows high-speed search in either direction during video
	playback.
	1) During playback, press 5 for forward search, or
	3 for reverse search.
	2) To resume normal playback, press 4/9.
	● During playback, press and hold 5 or 3. The search
	continues as long as you hold the button. Once you release
	the button, normal playback resumes.
	● A slight mosaic effect appears on the display during Shuttle
	Search. This is not a malfunction.
	ATTENTION:
	During Shuttle Search, parts of the
Power Switch	picture may not be clearly visible,
Lock Button	particularly on the left side of the
	screen.
VIDEO/MEMORY
8
4/9	Blank Search

Helps you find where you should start recording in the middle of a tape to avoid time code interruption.

(
pg. 13)

1 Load a cassette. (
pg. 10)

2 Set the VIDEO/MEMORY Switch to “VIDEO”.

3 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

		4 During Stop mode, press BLANK SEARCH.
	3	● The “BLANK SEARCH” indication appears and the
		camcorder automatically starts reverse or forward search,
Speaker	5	then stops at the spot which is about 3 seconds of tape

before the beginning of the detected blank portion. ● To cancel Blank Search midway, press 8.

Normal Playback

1 Load a cassette. (
pg. 10)

2 Set the VIDEO/MEMORY Switch to “VIDEO”.

3 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

4 To start playback, press 4/9.

5 To stop playback, press 8.

●During Stop mode, press 3 to rewind, or 5 to fast- forward the tape.

To control the speaker volume

Rotate the MMENU/VOL. Wheel towards “+” to turn up the volume, or towards “–” to turn down the volume.

NOTES:

●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV. (
pg. 17)

●For other notes,
pg. 39.

Still Playback

Pauses during video playback.

1)Press 4/9 during playback.

2)To resume normal playback, press 4/9 again.

●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged.

●When 4/9 is pressed, the image may not pause immediately while the camcorder stabilizes the still image.

NOTES:

●Before starting Blank Search, if the current position is at a blank portion, the camcorder searches in the reverse direction. If the current position is at a recorded portion, the camcorder searches in the forward direction.

●Blank Search does not work if “USE CLEANING CASSETTE” has appeared with the tape.

●If the beginning or end of the tape is reached during Blank Search, the camcorder stops automatically.

●A blank portion which is shorter than 5 seconds of tape may not be detected.

●The detected blank portion may be located between recorded scenes. Before you start recording, make sure there is no recorded scene after the blank portion.