JVC GR-DVL38, GR-DVL28, GR-DVL33, GR-DVL48 specifications EN47, Adjustment of VCR/CAMCORDER Timing

Move the highlight bar to “SYNCHRO” by rotating MENU/BRIGHT, then press it. The value for “SYNCHRO” is highlighted.

EN47

MENU/BRIGHT Dial

ADJUSTMENT OF VCR/CAMCORDER TIMING

Display

	48kHz MODE	FULL SOUND
	32kHz MODE	SOUND1
4	SYNCHRO	0 . 0
	INDICATION	ON
	DISPLAY	ON
	TIME CODE	OFF
	END

Playback Menu

4 Point the remote control at the camcorder’s remote sensor and press R.A.EDIT ON/OFF to make the Random Assemble Editing menu disappear, then press MENU/BRIGHT. The Playback Menu appears.

5

6 Based on the diagnostics performed (☞ pg. 46), you can now increase the VCR’s speed by rotating MENU/BRIGHT downward. You can also slow down the VCR’s speed by rotating MENU/BRIGHT upward. The adjustment range is from –1.3 to +1.3 seconds, in 0.1-second increments.

7 Press MENU/BRIGHT twice.

Now perform Random Assemble Editing beginning with step 4 on page 43.

NOTES:

48kHz MODE	FULL SOUND
32kHz MODE	SOUND1
4SYNCHRO	0 . 0
INDICATION	ON
DISPLAY	ON
TIME CODE	OFF
END

●Before performing actual Random Assemble Editing, do a few Random Assemble Editing trial runs to check whether the value you have input is appropriate or not, and make adjustments accordingly.

●Depending on the recorder, there may be situations where the timing difference cannot be fully corrected.

VCR

(Recording deck)

TV