54
EN
USER
MAINTENANCE
After Use
1 Turn off the camcorder.
2 Press PUSH OPEN and open the LCD monitor. Slide OPEN/EJECT in the direction of the arrow, then swing the cassette cover open until it locks. The cassette holder opens automatically.
Remove the cassette.
3 Press “PUSH HERE” to close the cassette holder, then close the cassette cover.
4 Close and lock the LCD monitor.
5 Slide BATTERY RELEASE and remove the battery pack.
6 Replace the lens cap over the lens.
OPEN/EJECT Switch
PUSH HERE
PUSH OPEN Button
Remove.
Cassette holder
BATTERY RELEASE Switch
Cleaning The Camcorder
1 To clean the exterior, wipe gently with a soft cloth.
Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth.
2 Open the LCD monitor and wipe gently with a soft cloth. Be careful not to damage the monitor. Close the LCD monitor.
3
4 To clean the viewfinder, raise it to the vertical position. Carefully lift the plastic tab on the bottom of the viewfinder, and open the cover
1.
5 Insert a lens blower or soft cloth into the gap at the bottom of the viewfinder and clean the interior of the viewfinder with it 2.
6 Replace the lens cap, making sure it locks in place. Tilt the viewfinder back to the horizontal position.
NOTES:
●Avoid using strong cleaning agents such as benzine or alcohol.
●Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.
●Mould may form if the lens is left dirty.
●When using a cleaner or chemically treated cloth refer to the cautions of each product.
Bottom of viewfinder
Blower brush
2
1
Cover