JVC KY-F75 manual Fall prevention, E19

Page 23

Fall prevention

Fall prevention

wire chain

6 mm

Camera head

MEMO

•Special attention is required when mounting the unit to the wall or ceiling. Rather than attempting to do it yourself, request a qualified person to perform such instal- lation. Falling of the unit may result in bodily injury.

•To prevent the unit from falling, connect the unit to a strong surface with a wire

chain, etc. When connecting such chain, use the bracket locking screw hole on the side which the camera mounting bracket is not mounted. (M2.6 ⋅ 6mm)

Take special caution to the length of the optional wire as well.

•For the fall-preventive wire, use the one with the strength that is more than 10 times of a mass including the lens.

E19

Page 22 Page 24
Image 23
Page 22 Page 24
Contents
This instruction book is made from 100% recycled paper Illustration with optional lens attachmentImportant Safeguards For USA and Canada Note for Accessory options JVC Sales Office For USA and Canada Safety PrecautionsThese instructions are for KY-F75U Thank you for purchasing the JVC KY-F75 Digital CameraRemote Contents On the CD-ROM for details FeaturesAccessories and attachments For IEEE1394 cable and DC power cable  page E14, E16 Cautionary notes  CleaningLine and patterns may appear distorted when recorded  Phenomena unique to CCDType C mount lens, there are restrictions Part names and their functionsFront and bottom Although the lens mount conforms toIeee 1394 connector Pin configurations of connectorsRemote terminal Metal 10-pin, female DC in terminal Mini DIN 8-pin, femaleLens terminal Metal 12-pin, female E10  When using other lenses than the motorized lensSystem E11  When the motorized lens is used Precautions for connection Preparing the computer E13 Installation procedureE14 Connection to computer Attaching the clamp filter E15 Mounting and setting the lensDC cable 2 m Connecting the AC adapterE16 E17  Turning the power on Turning the power OFF E18 Mounting the cameraMounting method Changing the camera mounting bracket positionE19 Fall preventionE20 How to recordBasic operations for recording E21 Starting the KY-LINK application softwareE22 When an external trigger device is connectedFreezing the image Interlocking with the flashClosing the KY-LINK application Capturing the still image on the computer CaptureSaving the captured image on the computer E24 Opening and closing the Settings screenProcedure Selecting the Setting screenE25 Saving the setting values on the computerE26 Exposure settings screenE27 E28 Gain ALC E29ALC Step E30 White balance settings screenAuto AUTO2 PresetE31 AUTO1E32 E33 Performing Auto white balanceE34 Adjustment of white shadingE35 Process settings screenE36 ABL E37E38 How to useWhite spot compensation  White spot detectionUsed to set the color tone of the camera image Color matrix settings screenE39 E40 E41 Lens settings screenBAR System setting screenE42 E43 Synchronizing flash and triggerE44  When the shutter mode is RandomE45 About ALC and EEI operationsCompatible lens SpecificationsConnectable PC models Ieee compliant Host AdapterE47 External dimensions unit mmKY-F75 3CCD Digital Camera
Top Page Image Contents