JVC KY-F75 manual E36

4. Settings (continued)

Process settings screen (continued)

	Item	Set Value					Contents
Noise sup.		LOW	Used to reduce noise in the video signal.
		MIDDLE	LOW/MIDDLE/HIGH : Noise reduction is performed.
		HIGH	Amount of reduction is increased in the order of LOW ￿
		[OFF]	MIDDLE ￿ HIGH.
			OFF:				Noise reduction is not performed.
				MEMO
			Note that details in fine sections of the image may get lost
			as the noise reduction amount is increased.
Gamma		[NORMAL]	Used to set whether the gamma curve to determine the
		ADJUST	reproduction of black is to be the standard value or
			customised.
			NORMAL: the gamma curve is set using the standard
						value (0.45)
			ADJUST:			set when changing the gamma curve
	Level	0.35	The gamma curve can be adjusted only when gamma is
	When	:	set to ADJUST.
	“ADJUST” is	(0.01 step)	Increase the number:				Improves the gradation of bright
	selected.	[0.45]					areas. However, the gradation of
		:					black becomes poorer.
		(0.05 step)	Decrease the number:				Improves the gradation of black
		:					areas. However, the gradation of
		0.90					bright areas becomes poorer.
		1.00
Nega		ON	Selects whether the camera image should be negative
		[OFF]	signal.
			ON: Conversion to negative signal is made.
			OFF: Conversion to negative signal is not made.
DSP bypass		[NORMAL]	Selects whether DSP (Digital Signal Processing) should
		BYPASS	be bypassed.
			NORMAL: Not bypassed.
			BYPASS: Bypassed. In this case the following setting
					items are fixed as indicated and cannot be set.
					•	Detail:		OFF
					•	Level dep.:		– – –
					•	Noise sup.:		OFF
					•	Gamma:		1.00
					•	Nega:		OFF
					•	Pixel comp.: OFF
					•	Color matrix: OFF

E36