Date/Time Setting
QOpen the LCD monitor to turn on the camcorder
Power Button
LCD monitor
Select [YES] within R 10 seconds
Slide your finger up and down on the sensor. Then touch OK.
SET DATE/TIME!
YES
NO
SET
•When the message disappears, press the power button for at least 2 seconds to turn off the power, and then press it again for at
least 2 seconds.
•Touch the sensors with your finger. The sensors do not function if you touch them with your finger nail or with gloves on.
SSelect [CLOCK SETTING]
CLOCK ADJUST |
|
CLOCK SETTING |
|
AREA SETTING |
|
SET FOR DAYLIGHT SAVING TIME | |
SET THE CITY, DATE AND TIME |
|
SET | QUIT |
TSelect the city closest to the area where you use the camcorder
AREA SETTING |
|
| NOV.1.2009 04:55PM |
SET | QUIT |
USelect [ON] if daylight saving time is effective.
SET FOR DAYLIGHT SAVING TIME | |
DAYLIGHT SAVING TIME (DST) | |
| OFF |
| NOV.1.2009 04.55PM |
SET DAYLIGHT SAVING TIME | |
SET | QUIT |
R
VSet the date and time
Touch sensor: Sets the date and time
}: Moves the cursor to the right
OK: Clock starts
CLOCK SETTING |
|
|
|
| |
DATE |
|
| TIME |
| |
NOV | 1 | 2009 | 4 | 55 | PM |
|
|
|
| GMT+ | 9:00 |
SAVE |
|
|
|
| QUIT |
EN5