JVC GZ-MS130U instruction manual How to use the Touch Sensor, Read This First

How to use the Touch Sensor

After the menu is displayed on the LCD monitor:

VIDEO
MANUAL SETTING
LIGHT
REGISTER EVENT
VIDEO QUALITY
USE DETAIL SETTINGS BASED
SET	QUIT

QSlide your finger up and down on the sensor.

RSelect [SET]. (Touch OK.)

A

B

ATo select an on-screen button appearing on the left side, touch the portion of the sensor next to the on-screen button.

BTo select an on-screen button appearing at the bottom of the screen, touch the buttons underneath them.

Read these INSTRUCTIONS to enjoy your CAMCORDER. For more details on the operations, refer to the GUIDEBOOK in the supplied CD-ROM.

In order to view the

GUIDEBOOK, Adobe® Acrobat® ReaderTM or Adobe® Reader® must be installed.

Adobe® Reader® can be loaded from Adobe’s web site:

http://www.adobe.com/

NOTE

Select your desired language with a single click.

The model name is indicated on the bottom of your camcorder.

Read This First!
Make a backup of important recorded data
It is recommended to copy your important
recorded data to a DVD or other recording media
for storage. JVC will not be responsible for any
lost data.	STARTED	GETTING
Make a trial recording
Before the actual recording of important data,
make a trial recording and play back the recorded
data to check that the video and sound have been
	PLAYBACK	RECORDING/
Reset the camcorder if it does not operate
recorded correctly. We recommend you to use the
same recording media when performing both the
trial recording and the actual recording.
correctly
Close the LCD monitor and remove the power		USING WITH
supply (battery pack or AC adapter) from the	TV
camcorder, then reattach it.
Precautions on handling batteries
• Be sure to use the JVC BN-VF808U/VF815U/
VF823U battery packs. This product includes	EDITING
patented and other proprietary technology and
is made to be used with the JVC battery and
not with other batteries. JVC cannot guarantee
safety or performance of this product when it is
operated by other batteries.
• If the camcorder is subjected to electrostatic
discharge, turn off the power before using it	COPYING
again.
If a malfunction occurs, stop using the
camcorder immediately and contact www.jvc.
com or by phone at 1-800-252-5722
Recorded data may be erased while the	INFORMATION	FURTHER
camcorder is being repaired or inspected. Back up
all data before requesting repairs or inspections.
Because camcorder may be used for
demonstration in a shop, the demonstration
mode is set to on by default
To deactivate the demonstration mode, set [DEMO
MODE] to [OFF].

When Using an SD Card

• Operations are confirmed on the following SD cards. Class 4 or higher compatible SD or SDHC card Panasonic, TOSHIBA, SanDisk, ATP SD card (256 MB to 2 GB) or SDHC card (4 GB to 32 GB)

• If other media are used, they may fail to record data correctly, or they may lose data that had already been recorded.

• MultiMediaCards are not supported.

EN9