JVC GZ-MS130U instruction manual EN18, Using an SD Card, Select Format SD Card to format the card

Page 18

Other Settings (Continued)

Using an SD Card

If you want to record to an SD card, the following operations need to be performed.

Operations are confirmed on the following SD cards: Class 4 or higher compatible SD or SDHC card Panasonic, TOSHIBA, SanDisk, ATP SD card (256 MB to 2 GB) or SDHC card (4 GB to 32 GB).

If other media are used, they may fail to record data correctly, or they may lose data that had already been recorded.

MultiMediaCards are not supported.

Cards used to record video on this camcorder cannot be played back on other devices.

Some card readers (including internal card readers in PCs) may not be able to support SDHC format. If you use an SDHC card for recording and encounter any reading error, the card reader you are using might be a non-SDHC supported device. Please use the camcorder or other SDHC compatible devices to access the card.

NOTE

Insert and remove the SD card only while the power is turned off. Otherwise, data on the card may be corrupted.

Do not touch the terminal on the reverse side of the label.

RChange the recording medium

The camcorder is programmed to record on the BUILT-IN MEMORY flash when it is shipped from the factory. You can change the recording medium to SD card.

Set [REC MEDIA FOR VIDEO] to [SD CARD) and [REC MEDIA FOR IMAGE] to [SD].

MEDIA SETTINGS

REC MEDIA FOR VIDEO

REC MEDIABUILTFOR-IMINAMEGEMORY

FORMAT BUILSDTCARD-IN MEM.

FORMAT SD CARD

ERASE ALL DATA ON

MEMORY CARD

SETQUIT

QInsert an SD card

Preparation:

Press Power (1) button to turn off the camcorder.

1 Open the SD card cover.

2 Firmly insert the card with its clipped edge first.

Clipped Edge

SFormat an SD card when using it for the first time

Select [FORMAT SD CARD] to format the card.

MEDIA SETTINGS

 

REC MEDIA FOR VIDEO

 

REC MEDIA FOR IMAGE

 

FORMAT BUILT-IN MEM.

 

FORMAT SD CARD

 

ERASE ALL DATA ON

 

SET

QUIT

3 Close the SD card cover.

It is recommended to copy your important recorded data to a DVD or other recording media for storage. JVC will not be responsible for any lost data.

LTo remove an SD card Push the SD card once.

After the card comes out a little, pull it out.

EN18

Image 18
Contents Para futuras consultas Dear CustomerApreciado cliente Número de modelo Número de serieSafety Precautions For USA-California OnlyImportant Safety Instructions TrademarksAccess lamp Charge the battery before recordingGrip Adjustment Power/charge lampDate/Time Setting Video recording Start recordingSelect the desired file Select playback modePlaying back Select FTouch OKContents How to use the Touch Sensor Read This FirstIndex EN10Remote Control EN11Camcorder EN12 AccessoriesPreparing the Remote Control Attaching the Core FilterIndications on LCD Monitor EN13During Still Image Recording Only EN14 During Video Playback During Still Image PlaybackEN15 Necessary Settings before UseCharging the Battery Pack Close the LCD monitor to turn off the camcorderOther Settings Date/Time SettingEN16 Select Language Language SettingEN17 Select the desired languageSelect Format SD Card to format the card Using an SD CardEN18 Close the SD card coverRecording Files EN19Video Recording Press and hold the Snapshot button halfway EN20Still Image Recording Press the Snapshot button fully to take the photo/pictureLED Light Checking the Remaining Battery PowerZooming Checking the Remaining Space on the recording mediumEN22 Press PLAY/REC to select the playback modePlaying Back Files Video PlaybackStill Image Playback Slide the mode switch to select # still image modeEN23 Operations during Still Image Playback On-screen buttonsManual Recording Change to Manual Recording ModeManual Setting Menu EN24Connection with TV Viewing Files on TVEN25 Playback OperationCapture a Still Image from a Video Managing FilesEN26 Deleting FilesEN27 Using a DVD BurnerCopying Files Types of Copying and Connectable DeviceSelect YES or no Select Create from ALLSelect the desired disc number Select ExecuteEN29 Creating a DVD using a PCClick Easy Installation Click Next Click FinishEN30 EN31 Drag the file and drop into the user listMaking User Lists to Arrange the Files EN32 Copying Files to a DVD PreparationFolder Structure and Extensions PixelaEN33 Customer Support InformationTo connect using the AV connectors analog dubbing EN34Dubbing Files to a VCR/DVD Recorder Changing the Export Setting Using with a Portable Media PlayerTurning on the Export Mode EN35EN36 Turning on the Upload ModeUploading Files to Websites Press Upload twiceEN37 Changing the Menu SettingsTroubleshooting Touch Menu Select the desired menuTo reset the camcorder when it does not operate normally EN38Format Error EN39Specifications EN40AC Adapter Operating temperature Power supplyBattery life EN41EN42 Battery PacksWhen using the AC adapter in areas other than the USA Recording MediumEN43 Main UnitDeclaration of Conformity Terms CD-ROM