
22 EN BASIC OPERATIONS
  | Still Image Recording | NOTES:  | ||||
  | 
  | 
  | 
  | 
  | 
  | ● If shooting is not performed for approx. 5 minutes when  | 
  | 
  | 
  | 
  | 
  | 
  | using the battery pack, the camera’s power shuts off  | 
Power Switch  | automatically. To perform shooting again, set the power  | |||||
  | 
  | 
  | 
  | 
  | 
  | switch to OFF, then to . When using AC adapter, the  | 
  | 
  | 
  | 
  | 
  | MODE | camera enters the power save mode. To cancel the power  | 
  | 
  | 
  | 
  | 
  | Recording Start/Stop Button  | save mode, perform any operation such as zooming.  | 
  | 
  | 
  | 
  | 
  | ● To turn the shutter sound off, see page 26.  | |
  | 
  | 
  | 
  | 
  | ||
  | 
  | 
  | 
  | 
  | 
  | ● For approximate number of storable images, see page 42.  | 
 Lock Button
When shooting with the flash, be carefull not to cover it.
1 Set the power switch to 
 while pressing down the lock button located on the switch.
2 Press MODE to select 
.
●The camera is programmed to record still images on the medium in the SD slot by the factory preset. To switch the recording medium, see pages 26 and 27.
●To change the image size and picture quality, see pages 26 and 29.
3 Press the recording start/stop button. The still image is recorded.
●To check how the image looks before recording, press the recording start/stop button halfway and hold. The 
 indicator appears and stops blinking when the captured image is focused. To cancel the recording, release the recording start/stop button. To record it on the recording medium, press the recording start/stop button fully.
Continuous Shooting
Keeping the recording start/stop button pressed in step 3 provides an effect similar to serial photography. (Interval between still images: approx. 0.3 seconds)
To use this function, set [CONTINUOUS SHOOTING] to [ON]. ( pg. 26, 29)
●Continuous shooting may not work well depending on the recording medium.
Deleting Files
If you press 
 during recording mode, the file recorded most recently will be deleted.
●However, if the recording mode (video, still image or voice) is switched or the power is turned off and on again after recording, you cannot delete the file.