JVC GZ-MC100US Connecting to a TV or VCR, Dubbing to a VCR, Start playback on the camera.
pg

Turn on the camera, the VCR and the TV.

Connecting to a TV or VCR

Open the cover.

To AV connector

S-Video/Audio/Video Cable (provided)

TV

VCR

A Black to S-VIDEO IN (Connect when your TV/VCR has S-VIDEO IN and A/V input connectors. In this case, it is not necessary to connect the yellow video cable.)

B Yellow to VIDEO IN (Connect when your TV/VCR has only A/V input connectors.)

C Red to AUDIO R IN* D White to AUDIO L IN*

* Not required for watching still images only.

1 Make sure all units are turned off.

2 Connect the camera to a TV or VCR as shown in the illustration.

If using a VCR, go to step 3. If not, go to step 4.

3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.

4

5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

BASIC OPERATIONS EN 25

6 Start playback on the camera. (
pg. 21)

To choose whether or not the following displays appear on the connected TV

●Date/Time

Set [DATE/TIME] to [AUTO], [ON] or [OFF]. (
pg. 26, 27)

●Counter

Set [SCENE COUNTER] to [ON] or [OFF]. (
pg. 26, 27)

(Pressing INFO button also turns on/off the displays.)

NOTES:

● It is recommended to use the AC Adapter as the power

supply instead of the battery pack. ( pg. 14)		OPERATIONS
● To monitor the picture and sound from the camera without
inserting a recording medium, set the camera’s power switch
to	, then set your TV to the appropriate input mode.
● Make sure you adjust the TV sound volume to its minimum
level to avoid a sudden burst of sound when the camera is		BASIC
turned on.

● To connect the camera to a PC, refer to the software installation and USB connection guide.

Dubbing to a VCR

1 Perform step 1 to 6 above.

2 At the point you want to start dubbing, start recording on the VCR. (Refer to the VCR’s instruction manual.)

3 To stop dubbing, stop recording on the VCR, then stop playback on the camera.