JVC GC-S5 manual Date and Time

Page 64

dSetup

Date and Time

This setting specifies the date and time. If you remove the battery for more than 5 minutes at a time, the date and time setting reverts to the initial setting (’98.01.01 12:00:00 AM). You must then reset the date and time.

Date: Automatic calendar (two-digit display)

Time: 12-hour format (noon shown as 12:00:00 PM)

1	In the SETUP screen, select
	“DATE/TIME”and press the

[MENU/EXE] button.

2	Press the [4] button until the
	digits you want to set start

flashing.

•Each time you press the [4] button,

the flashing digits change as follows: Year → Month → Day → Hour → Minute.

T DISP	POWER		MENU / EXE

DATE [ 9 8 ] 0 1 . 0 1 T I M E 12:00:00 AM

OK <EXE >

3	Use the [5] or [6] button to
	set the number.

FEATURES

ADVANCED

4	When you have repeated
	steps 2 and 3 and have set

the seconds, press the [MENU/EXE] button.

•This completes the date and time settings.

•The time display begins counting from zero “00” seconds.

•The “SETUP” screen reappears.

DIGITAL

OWER MENU / EXE

T DISP	POWER		MENU / EXE

64

Image 64

Contents GC-S5 Safety precautions Some do’s and don’ts on the safe use of equipment Above ALLContents Preface Getting Ready Important Information Test Shots Prior to PhotographyAccessories AA-V101 AC Power AdapterHand Strap VU-V101 Floppy Disk Adapter VU-V108 SmartMedia 8MB, 3.3VFeatures High Quality ImagesNomenclature LCD Panel Viewfinder DisplayUsing the Hand Strap Using the Hand StrapAttaching the Hand Strap Quick Start Guide Getting ReadyFully exhausted battery takes roughly 5 hours to charge Set the Mode dial to r Use the 5 or 6 button toMENU/EXE button Press the MENU/EXE buttonViewing Images Single-Frame Playback Loading the Battery Load the batteryClose the battery cover Direction of the arrowCharging the Battery Power outletPlug the AC power adapter CameraAbout the Battery Battery FeaturesRemaining Battery Capacity Number of Shots AvailableUsing a Domestic Power Outlet Into the power outletInsert the AC power adapter On the cameraSwitching On and Switching Off Switching OnSwitching Off Slide the Power switch to RightUsing a New SmartMedia SmartMediaCompatible SmartMedia Write ProtectionStoring Data Loading and Removing SmartMedia Loading the SmartMediaOpen the SmartMedia cover Insert the SmartMediaRemoving the SmartMedia Remove the SmartMediaUpright How to Hold the CameraOn its Side Pressing the Shutter Button Pressing halfway pressingLightly Pressing fully pressingMode Dial LCD Monitor, Indicator Lamps and Beeps Normal Auto Mode Normal PhotographyTaking Pictures Using the Viewfinder Normal Auto Mode Down fullyPress the Disp button Taking Pictures Using the LCD MonitorLook at the LCD monitor to compose the picture Without lifting your finger off Switch the camera off Insert the small plug onVideo cable supplied into Plug the other endQuality Select ButtonPress the Select button File Size ColorTo Exit Telephoto Mode Telephoto PhotographyPress the 5 x button Then take the pictureTo Exit Macro Mode Macro Close-Up ModePress the m Macro button Flash Mode Auto FlashRed-Eye Reduction Press the f Flash buttonForced Flash Suppressed FlashPlayback PlaybackSet the mode dial to p Single-Frame PlaybackPlayback Zoom To Exit Playback ZoomAutomatic Playback Playback Press the 3 or 4 buttonTo select Playback Automatic playback begins To Exit Auto PlaySepia To select SepiaSmooth To select SmoothTo set the level Smoothing effectResize During single-framePlayback, select the frame You want to resizeSet the camera to single Frame or multi-frame Playback CopyPress the MENU/EXE button To bring up the menu screen To select the image to be To Cancel CopyingSelect FRAME-1 and press the MENU/EXE button Select Start Copy Multi-Frame Playback Press the Disp button TwiceLast recorded frame appears To Revert to Single-Frame PlaybackPlayback Erasing Images Erasing ImagesSet the Mode dial to e Erasing a Single FrameUse the 3 or 4 button to Press the MENU/EXEButton To erase another frameTo Cancel All-Frame Erase Erasing All FramesTo Cancel Formatting Formatting InitialisationSetup Set the Mode dial to dChange the setting To changeQuality File SizeSharpness LCD Monitor Display SequenceColor Frame No. MemoryBeep Volume Quick SelectDate and Time Reset To Cancel ResetSelf-Timer Mode Set the Mode dial to sTo Interrupt the Self-Timer Compose the picture Press the shutter button Down halfwayManual Mode See Pages 69 to 75 for information on each of the settingsManual Mode Setting the White Balance Select W.BSetting Confirm the settingWhat is White Balance? Select the white balanceSetting the Brightness Adjusting the Exposure Select EVExposure compensation Select the brightnessExposure Compensation Setting the Flash Power If the LCD monitor is switched offSelect Flash Press the Disp buttonContinuous Shots 16-Cont Set the flash brightnessSet the continuous shot Select 16-CONTMenu screen appears Set the Mode dial to L Protecting a Single FrameSelect the frame to be Protected and press the MENU/EXE buttonPerform steps 1 and 2 To Remove Single-Frame ProtectionRemoving Protection from All Frames To Cancel Removal of Protection from All FramesSelect Unprotect ALL Switch on the personal Socket on the cameraConnection cable to Personal computerMode dial to l PC-Mode Downloading Images to a PCAccessories Guide As of April BN-V101 Battery Pack Rechargeable Battery CB-V12 Soft CaseVU-V108 SmartMedia HS-V12 PC and Macintosh Connection KitPlaces to Avoid SmartMedia About the Icons Safety NotesExamples of Icons AWARNING Safety Notes AWARNING ACAUTION ACAUTION ACAUTION Status Explanation Troubleshooting Problem Cause RemedyRemove the battery, then Switches Reinsert it and try again Specifications SystemPower Supply and Others Input/Output TerminalsBattery IndexSetting the brightness Memo Page GC-S5