JVC GC-S5 Socket on the camera, Connection cable to, Personal computer, Switch on the personal

Page 79

lPC-Mode (Downloading Images to a PC)

nNOTE

The HS-V12 PC and Macintosh® Connection Kit is NOT included with the GC-S5 Digital Still Camera.

In PC-mode, you can connect the camera to a Windows® or Macintosh® computer using the serial cable supplied with the PC and Macintosh® Connection Kit (optional). You can then transfer image data in either direction or control photography from your computer.

In this mode, you should use the AA-V101 AC Power Adapter supplied with the GC-S5 to avoid data transfer interruption caused by an exhausted battery.

!CAUTIONS

•Always switch all the devices off before you connect them together.

•Install the PC and Macintosh® Connection Kit on your personal computer before you connect the camera and computer together.

1	Switch the camera off and
	plug one end of the supplied
	serial cable into the DIGITAL
	socket on the camera.

	! CAUTION
	Do not plug anything other than the
	supplied serial cable into the DIGITAL
	socket as this could cause a fault. Check
	also that the plug is inserted fully into the
2	socket.
	Connect the other end of the
	connection cable to the
	personal computer.
	Windows® : Serial port (RS-232C)
	Macintosh® : Modem or printer port
	(RS-422)
3	Switch on the personal
	computer.

ADVANCED	FEATURES

79

Image 79

Contents GC-S5 Safety precautions Above ALL Some do’s and don’ts on the safe use of equipmentContents Preface Getting Ready Test Shots Prior to Photography Important InformationVU-V108 SmartMedia 8MB, 3.3V AccessoriesAA-V101 AC Power Adapter Hand Strap VU-V101 Floppy Disk AdapterHigh Quality Images FeaturesNomenclature Viewfinder Display LCD PanelUsing the Hand Strap Using the Hand StrapAttaching the Hand Strap Getting Ready Quick Start GuideFully exhausted battery takes roughly 5 hours to charge Press the MENU/EXE button Set the Mode dial to rUse the 5 or 6 button to MENU/EXE buttonViewing Images Single-Frame Playback Direction of the arrow Loading the BatteryLoad the battery Close the battery coverCamera Charging the BatteryPower outlet Plug the AC power adapterBattery Features About the BatteryNumber of Shots Available Remaining Battery CapacityOn the camera Using a Domestic Power OutletInto the power outlet Insert the AC power adapterSlide the Power switch to Right Switching On and Switching OffSwitching On Switching OffWrite Protection Using a New SmartMediaSmartMedia Compatible SmartMediaStoring Data Insert the SmartMedia Loading and Removing SmartMediaLoading the SmartMedia Open the SmartMedia coverRemove the SmartMedia Removing the SmartMediaUpright How to Hold the CameraOn its Side Pressing fully pressing Pressing the Shutter ButtonPressing halfway pressing LightlyMode Dial LCD Monitor, Indicator Lamps and Beeps Normal Photography Normal Auto ModeTaking Pictures Using the Viewfinder Down fully Normal Auto ModePress the Disp button Taking Pictures Using the LCD MonitorLook at the LCD monitor to compose the picture Without lifting your finger off Plug the other end Switch the camera offInsert the small plug on Video cable supplied intoQuality Select ButtonPress the Select button Color File SizeThen take the picture To Exit Telephoto ModeTelephoto Photography Press the 5 x buttonTo Exit Macro Mode Macro Close-Up ModePress the m Macro button Press the f Flash button Flash ModeAuto Flash Red-Eye ReductionSuppressed Flash Forced FlashPlayback PlaybackSingle-Frame Playback Set the mode dial to pTo Exit Playback Zoom Playback ZoomAutomatic playback begins To Exit Auto Play Automatic Playback PlaybackPress the 3 or 4 button To select PlaybackTo select Sepia SepiaTo select Smooth SmoothSmoothing effect To set the levelYou want to resize ResizeDuring single-frame Playback, select the frameSet the camera to single Frame or multi-frame Playback CopyPress the MENU/EXE button To bring up the menu screen To select the image to be To Cancel CopyingSelect FRAME-1 and press the MENU/EXE button Select Start Copy To Revert to Single-Frame Playback Multi-Frame PlaybackPress the Disp button Twice Last recorded frame appearsPlayback Erasing Images Erasing ImagesErasing a Single Frame Set the Mode dial to eTo erase another frame Use the 3 or 4 button toPress the MENU/EXE ButtonErasing All Frames To Cancel All-Frame EraseFormatting Initialisation To Cancel FormattingTo change SetupSet the Mode dial to d Change the settingLCD Monitor Display Sequence QualityFile Size SharpnessFrame No. Memory ColorQuick Select Beep VolumeDate and Time To Cancel Reset ResetCompose the picture Press the shutter button Down halfway Self-Timer ModeSet the Mode dial to s To Interrupt the Self-TimerSee Pages 69 to 75 for information on each of the settings Manual ModeManual Mode Select W.B Setting the White BalanceSelect the white balance SettingConfirm the setting What is White Balance?Select EV Setting the Brightness Adjusting the ExposureExposure compensation Select the brightnessExposure Compensation Press the Disp button Setting the Flash PowerIf the LCD monitor is switched off Select FlashSet the flash brightness Continuous Shots 16-ContSet the continuous shot Select 16-CONTMenu screen appears Protected and press the MENU/EXE button Set the Mode dial to LProtecting a Single Frame Select the frame to beTo Remove Single-Frame Protection Perform steps 1 and 2Removing Protection from All Frames To Cancel Removal of Protection from All FramesSelect Unprotect ALL Personal computer Switch on the personalSocket on the camera Connection cable toPC-Mode Downloading Images to a PC Mode dial to lHS-V12 PC and Macintosh Connection Kit Accessories Guide As of AprilBN-V101 Battery Pack Rechargeable Battery CB-V12 Soft Case VU-V108 SmartMediaPlaces to Avoid SmartMedia About the Icons Safety NotesExamples of Icons AWARNING Safety Notes AWARNING ACAUTION ACAUTION ACAUTION Status Explanation Problem Cause Remedy TroubleshootingRemove the battery, then Switches Reinsert it and try again System SpecificationsInput/Output Terminals Power Supply and OthersIndex BatterySetting the brightness Memo Page GC-S5