JVC TK-C215VP4, TK-C215VP12 instruction manual About Connection Cables, Video signal cables

Page 19

About Connection Cables

The maximum connection distance varies with the type of cable used. Please refer carefully to the table for each cable during connection.

*Be sure to turn off the power of devices before connecting cables.

To video Signal

Cable

To DC 12 V or AC 24 V

Power Supply

Note:

When mounting the heater (sold separately: KA-ZH215), make sure to connect the wire to an AC 24 V power supply during use.

Video signal cables

Connect the coaxial cables (BNC) to the video signal output connector (BNC).

Cable

Maximum extension (No cable compensator)

RG-59

200 m

 

 

RG-6

350 m

 

 

RG-11

450 m

 

 

DC 12 V or AC 24 V power supply cable

Connect the DC 12 V or the AC 24 V power supply to the DC 12 V/AC 24 V terminals on the terminal board. To prevent connection errors or a cable disconnection, we recommend the use of lug plates for the connections. The following table shows the connection distances and connection cables provided that 2-conductor VVF cables (vinyl-insulated vinyl sheath cables) are used.

Conductor diameter (mm)

R 1.0 mm

R 1.6 mm

R 2.0 mm

 

 

(AWG18)

(AWG14)

(AWG12)

 

 

 

 

 

Maximum

DC12V

50 m

140 m

220 m

(160ft)

(450ft)

(720ft)

extension

 

 

 

 

 

 

130 m

350 m

550 m

(Without heater)

AC24V

(420ft)

(1100ft)

(1800ft)

 

 

 

 

 

 

 

Maximum

 

40 m

120 m

180 m

extension

AC24V

(130 ft)

(390 ft)

(590 ft)

(With heater)

 

 

 

 

 

 

 

 

 

 

Note:

If thin cables are used (i.e. with a high resistance), a significant voltage drop will occur when the unit is at its maximum power consumption.

Either use a thick cable to restrict the voltage drop at the camera side to below 10 %, or place the power supply near to the camera. When the voltage is low, the protection circuit within the camera may be triggered and the power of the camera may turn off automatically.

Do not allow input from both a DC 12 V and AC 24 V power supply at the same time.

When using a DC 12 V power supply, ensure that the polarities of the cable are correct.

The product shall be powered by Class 2 only.

The AC 24 V power supply should conform to the following:

U-type: Class 2 only

E-type: Isolated power supply only

15

Image 19
Contents TK-C215VP4  Mounting screws for the base Safety PrecautionsPrecautions regarding fall prevention  Mounting the fall prevention wire Inserting the silica gel supplied Precautions for proper installationMemo  Binding the sealing tape When mounting the camera using the pipe Dust-proof performance For Customer Use TK-C215VP4Introduction Dear Customer Safety Precautions Important Safeguards Characteristics Table of Contents Others Precautions for proper use of this productMaintenance Storage and Location of UseCamera Name of PartsFastening Screw for Dome Cover AC 24 V/DC 12 V Power Supply WireVideo signal output connector BNC a Pg BaseCamera Interior Function selection switches Setting the Lens and SwitchesRESET/SPOT RESET/SPOT button B,+/- R/B,+/- adjustment buttonDAY/NIGHT Easy Day & Night switch Sync Synchronization system selection switchWHT.BAL. ATW/MANUAL selection switch BLC Backlight compensation switchSystem Example DC 12 V or AC 24 V power supply cable Video signal cablesAbout Connection Cables Procedures from Connection to Setting Mounting the base Setting the switchesMounting the base Mounting the fall prevention wire to a firm placeStoring cables Connecting the coaxial cable a PgConnecting the AC 24 V/DC 12 V power supply wires Cable ConnectionFastening the 2 fastening screws of the camera unit Mounting the camera unitFill the hole with sealing material Mounting the camera unit to the baseInserting the silica gel supplied Adjusting the shooting direction of the camera Adjusting the video imageMounting the test monitor Adjusting the brightness Adjusting the angle of view, focus and brightnessAdjusting the angle of view Adjusting the focusMounting the dome cover Mounting the inner domeFollowing procedures are same as normal mounting Mounting the camera using the electrical boxFastening the base to the ceiling Mounting the camera using the pipeMounting the fall prevention wire to a firm place a Pg Mounting the base to the pipeRemoving the plug for the piping hole of the base White-spot correction  Camera Specifications Lens  General  Dimensional Outline DrawingFocus chart TK-C215VP4 Dome Camera

TK-C215VP12, TK-C215VP4 specifications

The JVC TK-C215VP4 and TK-C215VP12 are advanced surveillance cameras designed specifically for effective security monitoring and video surveillance. They are part of JVC's commitment to delivering high-performance video solutions tailored for a range of applications, from retail environments to transportation hubs.

One of the standout features of both models is their exceptional image quality. Utilizing a 1/3-inch CCD image sensor, these cameras provide sharp and detailed video in various lighting conditions. Their impressive resolution capabilities ensure that you can capture clear images, making it easier to identify subjects even in complex surveillance scenarios.

The TK-C215VP4 and TK-C215VP12 are equipped with advanced digital signal processing technology, which enhances the overall image performance, providing improved clarity and reducing noise. This is particularly beneficial in low-light situations, where the cameras excel thanks to their low-light sensitivity ratings. Users can expect reliable performance even in challenging lighting environments, ensuring that security personnel do not miss critical activities.

Another notable feature of these models is their versatility in terms of installation. Both cameras support a range of mounting options, making them suitable for various settings, including indoor and outdoor environments. This flexibility allows for seamless integration into existing security systems.

The TK-C215VP4 features a motorized vari-focal lens that provides an adjustable focal length, allowing users to customize the field of view according to their specific surveillance needs. This capability is particularly useful for monitoring larger areas or areas where subjects may be at varying distances.

On the other hand, the TK-C215VP12 model boasts a fixed lens design, which is ideal for situations where a defined field of view is required. This makes it a perfect choice for more controlled installations where the monitoring area can be predetermined.

Both models also include robust connectivity options, supporting various output formats that ensure compatibility with a wide range of video management systems. Additionally, the cameras are designed with user-friendly controls, enabling easy adjustments to settings without the need for extensive technical knowledge.

In summary, the JVC TK-C215VP4 and TK-C215VP12 represent a blend of cutting-edge technology, superior image quality, and practical design, making them reliable choices for any security surveillance application. Their advanced features cater to a variety of user requirements, ensuring effective monitoring while enhancing the overall security posture.