JVC TK-C215VP12, TK-C215VP4 instruction manual Safety Precautions

Page 8

Introduction

Safety Precautions (continued)

The unit is to be powered by a DC 12 V or an AC 24 V power supply.

The unit is to be powered by a UL Listed DC 12 V or an AC 24 V power supply. (For U type)

The AC 24 V and 12 V DC power supply shall conform to the following: Class 2 only (For USA), Isolated power supply only (For Europe).

This installation should be made by a qualified service person and should conform to all local codes.

This installation shall be in accordance with the National Electrical Code, ANSI/NFPA 70.

Any Mention in this manual of Alarm inputs have not been evaluated by UL to be used for Burglar Alarm Functionality.

When mounting this unit to the ceiling or wall, mount it to a secure location where it can support the mass of this unit. When mounting to an insecure location, make sure to carry out reinforcement of the ceiling or wall before installation.

The rating label is adhered to the bottom surface of the camera unit.

The camera unit may fall if the mounting screw or piping is not properly tightened. Ensure that the screws and nuts are properly tightened.

We do not accept liability for any damage to the camera in cases when it is dropped because of incomplete installation due to not observing the installation instructions correctly. Please be careful when installing the camera.

Do not install the camera near lighting equipment with a high temperature, such as spotlights. Doing so may cause malfunction or fire.

Before starting an important recording, be sure to perform a test recording in order to confirm that a normal recording is possible.

We will not provide any compensation whatsoever for the contents to be recorded or loss of opportunities when recording is not properly performed due to malfunction of the video camera, VTR, hard disk recorder or video tape.

Before touching the camera unit, make sure to touch the metal surface of the [MONITOR] terminal to discharge any static electricity from your body. Static electricity may cause the camera to malfunction.

4

Image 8
Contents TK-C215VP4 Safety Precautions Precautions regarding fall prevention Mounting the fall prevention wire  Mounting screws for the baseMemo Precautions for proper installation Inserting the silica gel supplied  Dust-proof performance When mounting the camera using the pipe Binding the sealing tape TK-C215VP4 For Customer UseIntroduction Dear Customer Safety Precautions Important Safeguards Characteristics Table of Contents Precautions for proper use of this product MaintenanceStorage and Location of Use OthersName of Parts CameraAC 24 V/DC 12 V Power Supply Wire Video signal output connector BNC a PgBase Fastening Screw for Dome CoverCamera Interior Setting the Lens and Switches RESET/SPOT RESET/SPOT buttonB,+/- R/B,+/- adjustment button Function selection switchesSync Synchronization system selection switch WHT.BAL. ATW/MANUAL selection switchBLC Backlight compensation switch DAY/NIGHT Easy Day & Night switchSystem Example About Connection Cables Video signal cablesDC 12 V or AC 24 V power supply cable Procedures from Connection to Setting Setting the switches Mounting the baseMounting the fall prevention wire to a firm place Mounting the baseConnecting the coaxial cable a Pg Connecting the AC 24 V/DC 12 V power supply wiresCable Connection Storing cablesMounting the camera unit Fill the hole with sealing materialMounting the camera unit to the base Fastening the 2 fastening screws of the camera unitInserting the silica gel supplied Mounting the test monitor Adjusting the video imageAdjusting the shooting direction of the camera Adjusting the angle of view, focus and brightness Adjusting the angle of viewAdjusting the focus Adjusting the brightnessMounting the inner dome Mounting the dome coverMounting the camera using the electrical box Following procedures are same as normal mountingMounting the camera using the pipe Mounting the fall prevention wire to a firm place a PgMounting the base to the pipe Fastening the base to the ceilingRemoving the plug for the piping hole of the base White-spot correction  Lens Specifications Camera  Dimensional Outline Drawing  GeneralFocus chart TK-C215VP4 Dome Camera

TK-C215VP12, TK-C215VP4 specifications

The JVC TK-C215VP4 and TK-C215VP12 are advanced surveillance cameras designed specifically for effective security monitoring and video surveillance. They are part of JVC's commitment to delivering high-performance video solutions tailored for a range of applications, from retail environments to transportation hubs.

One of the standout features of both models is their exceptional image quality. Utilizing a 1/3-inch CCD image sensor, these cameras provide sharp and detailed video in various lighting conditions. Their impressive resolution capabilities ensure that you can capture clear images, making it easier to identify subjects even in complex surveillance scenarios.

The TK-C215VP4 and TK-C215VP12 are equipped with advanced digital signal processing technology, which enhances the overall image performance, providing improved clarity and reducing noise. This is particularly beneficial in low-light situations, where the cameras excel thanks to their low-light sensitivity ratings. Users can expect reliable performance even in challenging lighting environments, ensuring that security personnel do not miss critical activities.

Another notable feature of these models is their versatility in terms of installation. Both cameras support a range of mounting options, making them suitable for various settings, including indoor and outdoor environments. This flexibility allows for seamless integration into existing security systems.

The TK-C215VP4 features a motorized vari-focal lens that provides an adjustable focal length, allowing users to customize the field of view according to their specific surveillance needs. This capability is particularly useful for monitoring larger areas or areas where subjects may be at varying distances.

On the other hand, the TK-C215VP12 model boasts a fixed lens design, which is ideal for situations where a defined field of view is required. This makes it a perfect choice for more controlled installations where the monitoring area can be predetermined.

Both models also include robust connectivity options, supporting various output formats that ensure compatibility with a wide range of video management systems. Additionally, the cameras are designed with user-friendly controls, enabling easy adjustments to settings without the need for extensive technical knowledge.

In summary, the JVC TK-C215VP4 and TK-C215VP12 represent a blend of cutting-edge technology, superior image quality, and practical design, making them reliable choices for any security surveillance application. Their advanced features cater to a variety of user requirements, ensuring effective monitoring while enhancing the overall security posture.