JVC TK-C215VP12, TK-C215VP4 instruction manual Adjusting the video image, Mounting the test monitor

Page 26

Installation and Connection

Adjusting the video image

Upon mounting the camera, adjust the images while checking the actual image.

Mounting the test monitor

Connect the [MONITOR] terminal of this unit to the test monitor to adjust the camera’s shooting direction, angle of view and focus.

Memo:

Panning: ±175 

Before setting, ensure to turn on the power of the system.

[MONITOR] Terminal

75 K terminal

Rotation: ±175 

UP

O

N

Tilting: ±70 

Camera’s shooting direction mark

Pan center mark

Rotation center mark

Rotation knob

:Always adjust the rotation by holding this knob.

Test Monitor

Adjusting the shooting direction of the camera

The camera unit can be panned, tilted or rotated. Adjust the camera in the direction of the object.

Note:

Before touching the camera unit, make sure to touch the metal surface of the [MONITOR] terminal to discharge any static electricity from your body. Static electricity may cause the camera to malfunction.

Before adjusting the shooting direction of the camera, ensure that the pan fastening screw is loosened. Moving the lens unit without loosening the pan fastening screw may damage the lens unit.

Memo:

Panning/rotation of ±175  is possible from each of the camera unit’s shooting direction mark, pan center mark and rotation center mark. When adjusting the rotation, do not hold the lens unit. Always adjust by holding the rotation knob.

When using the camera at locations with strong vibration after the angle of view is adjusted, stabilize by tightening the tilt fastening screw to prevent the camera’s angle of view from going out of alignment. (A Pg. 11)

Note:

Moving the camera beyond its adjustable range may cause failure in maintaining the performance of this camera.

As this camera has a wide tilt/rotation range, a part of this camera may appear on the screen depending on the angle of view and orientation.

Do not hold the lens unit when adjusting the direction of the camera. Applying force on the lens unit may damage it.

22

Image 26
Contents TK-C215VP4  Mounting the fall prevention wire Safety PrecautionsPrecautions regarding fall prevention  Mounting screws for the baseMemo Precautions for proper installation Inserting the silica gel supplied  Dust-proof performance When mounting the camera using the pipe Binding the sealing tape TK-C215VP4 For Customer UseIntroduction Dear Customer Safety Precautions Important Safeguards Characteristics Table of Contents Storage and Location of Use Precautions for proper use of this productMaintenance OthersName of Parts CameraBase AC 24 V/DC 12 V Power Supply WireVideo signal output connector BNC a Pg Fastening Screw for Dome CoverCamera Interior B,+/- R/B,+/- adjustment button Setting the Lens and SwitchesRESET/SPOT RESET/SPOT button Function selection switchesBLC Backlight compensation switch Sync Synchronization system selection switchWHT.BAL. ATW/MANUAL selection switch DAY/NIGHT Easy Day & Night switchSystem Example About Connection Cables Video signal cablesDC 12 V or AC 24 V power supply cable Procedures from Connection to Setting Setting the switches Mounting the baseMounting the fall prevention wire to a firm place Mounting the baseCable Connection Connecting the coaxial cable a PgConnecting the AC 24 V/DC 12 V power supply wires Storing cablesMounting the camera unit to the base Mounting the camera unitFill the hole with sealing material Fastening the 2 fastening screws of the camera unitInserting the silica gel supplied Mounting the test monitor Adjusting the video imageAdjusting the shooting direction of the camera Adjusting the focus Adjusting the angle of view, focus and brightnessAdjusting the angle of view Adjusting the brightnessMounting the inner dome Mounting the dome coverMounting the camera using the electrical box Following procedures are same as normal mountingMounting the base to the pipe Mounting the camera using the pipeMounting the fall prevention wire to a firm place a Pg Fastening the base to the ceilingRemoving the plug for the piping hole of the base White-spot correction  Lens Specifications Camera  Dimensional Outline Drawing  GeneralFocus chart TK-C215VP4 Dome Camera

TK-C215VP12, TK-C215VP4 specifications

The JVC TK-C215VP4 and TK-C215VP12 are advanced surveillance cameras designed specifically for effective security monitoring and video surveillance. They are part of JVC's commitment to delivering high-performance video solutions tailored for a range of applications, from retail environments to transportation hubs.

One of the standout features of both models is their exceptional image quality. Utilizing a 1/3-inch CCD image sensor, these cameras provide sharp and detailed video in various lighting conditions. Their impressive resolution capabilities ensure that you can capture clear images, making it easier to identify subjects even in complex surveillance scenarios.

The TK-C215VP4 and TK-C215VP12 are equipped with advanced digital signal processing technology, which enhances the overall image performance, providing improved clarity and reducing noise. This is particularly beneficial in low-light situations, where the cameras excel thanks to their low-light sensitivity ratings. Users can expect reliable performance even in challenging lighting environments, ensuring that security personnel do not miss critical activities.

Another notable feature of these models is their versatility in terms of installation. Both cameras support a range of mounting options, making them suitable for various settings, including indoor and outdoor environments. This flexibility allows for seamless integration into existing security systems.

The TK-C215VP4 features a motorized vari-focal lens that provides an adjustable focal length, allowing users to customize the field of view according to their specific surveillance needs. This capability is particularly useful for monitoring larger areas or areas where subjects may be at varying distances.

On the other hand, the TK-C215VP12 model boasts a fixed lens design, which is ideal for situations where a defined field of view is required. This makes it a perfect choice for more controlled installations where the monitoring area can be predetermined.

Both models also include robust connectivity options, supporting various output formats that ensure compatibility with a wide range of video management systems. Additionally, the cameras are designed with user-friendly controls, enabling easy adjustments to settings without the need for extensive technical knowledge.

In summary, the JVC TK-C215VP4 and TK-C215VP12 represent a blend of cutting-edge technology, superior image quality, and practical design, making them reliable choices for any security surveillance application. Their advanced features cater to a variety of user requirements, ensuring effective monitoring while enhancing the overall security posture.