Altinex MT113-100, MT113-101 manual CnS, Saved

Page 11

MULTITASKER™

Command Format: [VERCnUi]

Cn = Card ID (n = slot # from 1 to max slots)

Ui = Unit ID (i = # from 0 to 9)

Example:

An MT113-100/101card is in slot #4. Send the command [VERC4], and the MultiTasker Enclosure will return the following feedback:

[MT113-100 690-0133-009 C04]

MT113-100

= the card model

690-0133-009 = the software version

C04

= card ID number

2.[C]

This command receives the status of the card.

Command Format: [CnUi]

Cn = Card ID (n = # from 1 to max slots)

Ui = Unit ID (i = # from 0 to 9)

Example:

There is one MT113-100/101card in slot #4. Sending the command [C4] to the MultiTasker will display feedback similar to the following:

In1Vol=16/16

In2Vol=16/16

In3Vol=16/16

OutVol=16/16

Bass =08/16

Treble=08/16

Loudness:OFF

The status shows the input volume settings, in this case 16 out of 16, the output volume, the bass and treble levels and that the loudness feature is turned off.

If there is no card in slot #4, sending the [C4] command will not return any feedback.

3.[CnS]

This command saves the card volume settings. This configuration will be restored after the system is reset or powered off then on.

Command Format: [CnSUi]

Cn = Card ID (n = # from 1 to max slots)

S = save configuration

Ui = Unit ID (i = # from 0 to 9)

Example:

There is an MT113-100/101in slot #4. All volume levels are set to the maximum of 16. The bass and treble levels are set to 08. Save the settings of the card by sending the command [C4S]. The feedback will be as follows:

In1Vol=16/16

In2Vol=16/16

In3Vol=16/16

OutVol=16/16 Bass =08/16 Treble=08/16 Loudness:OFF

[SAVED]

4.[?]

This command will return general information about the MultiTasker and cards installed in the unit.

Command Format: [?Ui]

Cn = Card ID (n = # from 1 to max slots)

Ui = Unit ID (i = from 0 to 9)

Example:

A MultiTasker with ID #0 has a front panel with part number MT101-102 and contains an MT113-100/101. Send the command [?] and receive the following feedback:

[(MT101-102U0)(MT113-100C04)]

MT101-102U1 = Panel Number and Unit ID MT113-100C04 = An MT113-100 is in slot 4.

5.[?C]

This command will return general information about the card and its status. It is a function of both the card and the front panel and is only available with MultiTasker Front Panel systems that have the following firmware:

400-0209-002

10

Image 11
Contents MT113-100/101 Table of Contents FCC / CE Notice Precautions / Safety WarningsCleaning GeneralMT113-100/101 Technical SpecificationsDescription of MT113-100/101 MT113-101 Description Application Diagrams Control Supply Diagram 3 MT113-100 Internal ViewControl Diagram 4 MT113-101 Internal ViewOperation Installing Your MT113-100/101Description of Commands Saved CnS…F Feedback STA…S Save Selt SeliSelo SelbLOD0 VLIVlba VltaRUP Volume Ramping FeatureMUT1 CLRRamp RDNRDN= RSTMemory is Good Card ID CommandsRamptime = 16 Seconds TestSID+ RSISIDn SIDnCiRMG Help38. WR RMCSelb STASeli SeloRUP Menu ModeMenu Command Definitions CLRSelect this Card for control Using Menu ModeMenu Mode Examples Menu TypesNo Sound Troubleshooting GuideFAN does not Spin Sound Level is LOW Limited WARRANTY/RETURN PolicyAltinex Policy Sound Distortion

MT113-100, MT113-101 specifications

The Altinex MT113-101 and MT113-100 are innovative devices designed to enhance presentation applications in educational and corporate environments. These units are part of Altinex’s commitment to providing high-quality AV solutions, focusing on usability, versatility, and advanced technology.

One of the standout features of the MT113 series is its flexible connectivity options. The MT113-101 and MT113-100 are equipped with a variety of input ports, accommodating different devices and enhancing user experience. The units include HDMI, VGA, and audio inputs, making it easy to connect laptops, desktops, projectors, and other presentation equipment. The ease of connectivity allows users to switch between multiple sources effortlessly, promoting a seamless presentation experience.

Another notable characteristic is the built-in scaling technology. This feature allows the MT113 devices to adjust the resolution of the incoming signal to match the output requirements of the display. This ensures that presentations are delivered with optimal clarity, regardless of the device being used. Consequently, users enjoy crisp visuals and accurate color reproduction, which is vital for effective communication.

The MT113 units also prioritize user-friendliness. Their intuitive design includes straightforward controls, allowing even those with limited technical know-how to operate the system efficiently. This focus on ease of use is essential in environments such as classrooms and conference rooms, where time is often of the essence.

Additionally, the MT113 series is designed with robust build quality in mind. The devices are constructed to withstand the rigors of daily use, making them ideal for high-traffic environments. Their reliability is paramount, especially in corporate settings where presentations can significantly impact outcomes.

Moreover, both models are compact and can be easily integrated into various setups, whether wall-mounted or placed on a tabletop. This flexibility allows organizations to adapt the equipment to their specific spatial and functional needs.

In conclusion, the Altinex MT113-101 and MT113-100 are sophisticated yet user-friendly solutions designed to elevate the presentation experience. With their versatile connectivity options, advanced scaling capabilities, and durable design, these devices are well-suited for a range of applications in educational and professional settings. Their combination of functionality and ease of use makes them a valuable addition to any AV setup.