Altinex MT113-100, MT113-101 manual Help, 38. WR, Rmc, Rmg

Page 19

MULTITASKER™

37.[HELP]

This command displays information available for the MultiTasker interface commands.

Command Format: [HELPCnUi]

Cn = Card ID (n = # from 1 to max slots)

Ui = Unit ID (i = # from 0 to 9)

Example:

In order to display the RS-232 commands available for the MT113-100/101card in slot #2, send the command [HELPC2]. The commands along with a brief description will be displayed in the Terminal Window.

38.[WR]

This command groups multiple cards in the enclosure allowing all the group members to be controlled simultaneously with the same command. Each unit may define a maximum of eight groups.

In MultiTasker systems with audio and video cards, boards are typically grouped as follows:

Group 1 = Video Cards

Group 2 = Audio Cards

Group 3 = Video and Audio Cards

If assigning group commands to button functions, it is best to use the "Press and Hold on Power Up" to make group settings.

Command Format: [WRCn1Cn2…GkUi]

Cn = Card ID (n = slot # from 1 to max slots)

Gk = Group number (k = # from 1-8)

Ui = Unit ID (i = # from 0-9)

Example:

To group cards 1, 2, and 3 as group 5 of

Unit ID 1, send the command [WRC1C2C3G5U1]. After executing this command, cards 1, 2 and 3 will be grouped together as group 5 of Unit ID 1. The system will return the following feedback:

G1=C1C2C3

Now, when a command is sent to G1, each board in G1 will execute the same command.

39.[RMC]

This command may be used to remove one or more group members from a group. Reset the system after using this command for all changes to take effect.

Command Format: [RMCn1Cn2…GkUi] Cn = Card ID (n= # from 1 to max slots)

Gk = Group number (k = # from 1-8)

Ui = Unit ID (i = # from 0-9)

Example:

Group 1 consists of the cards located in slots numbered 1, 2, 3, 4 and 5. Remove just cards #4 and #5 from the group by sending the command [RMC4C5G1]. The system will return the following feedback:

G1=C1C2C3

40.[RMG]

This command may be used to delete an entire group, or all groups.

REMOVE ONE GROUP MEMBERS

Remove all the members from the group, effectively deleting the group.

Command Format: [RMGkUi]

Gk = Group number (k = # from 1-8)

Ui = Unit ID (i = # from 0-9)

Example:

Group 1 consists of the cards located in slots number 1, 2 and 3. Remove all cards from the group by sending the command [RMG1]. The system will return the following feedback:

G1=EMPTY

400-0209-002

18

Page 18 Page 20
Image 19
Page 18 Page 20
Contents MT113-100/101 Table of Contents FCC / CE Notice Precautions / Safety WarningsCleaning GeneralMT113-100/101 Technical SpecificationsDescription of MT113-100/101 MT113-101 Description Application Diagrams Control Supply Diagram 3 MT113-100 Internal ViewControl Diagram 4 MT113-101 Internal ViewDescription of Commands Installing Your MT113-100/101Operation Saved CnS…S Save STA…F Feedback Selt SeliSelo SelbLOD0 VLIVlba VltaRUP Volume Ramping FeatureMUT1 CLRRamp RDNRDN= RSTMemory is Good Card ID CommandsRamptime = 16 Seconds TestSID+ RSISIDn SIDnCiRMG Help38. WR RMCSelb STASeli SeloRUP Menu ModeMenu Command Definitions CLRSelect this Card for control Using Menu ModeMenu Mode Examples Menu TypesFAN does not Spin Troubleshooting GuideNo Sound Sound Level is LOW Limited WARRANTY/RETURN PolicyAltinex Policy Sound Distortion

MT113-100, MT113-101 specifications

The Altinex MT113-101 and MT113-100 are innovative devices designed to enhance presentation applications in educational and corporate environments. These units are part of Altinex’s commitment to providing high-quality AV solutions, focusing on usability, versatility, and advanced technology.

One of the standout features of the MT113 series is its flexible connectivity options. The MT113-101 and MT113-100 are equipped with a variety of input ports, accommodating different devices and enhancing user experience. The units include HDMI, VGA, and audio inputs, making it easy to connect laptops, desktops, projectors, and other presentation equipment. The ease of connectivity allows users to switch between multiple sources effortlessly, promoting a seamless presentation experience.

Another notable characteristic is the built-in scaling technology. This feature allows the MT113 devices to adjust the resolution of the incoming signal to match the output requirements of the display. This ensures that presentations are delivered with optimal clarity, regardless of the device being used. Consequently, users enjoy crisp visuals and accurate color reproduction, which is vital for effective communication.

The MT113 units also prioritize user-friendliness. Their intuitive design includes straightforward controls, allowing even those with limited technical know-how to operate the system efficiently. This focus on ease of use is essential in environments such as classrooms and conference rooms, where time is often of the essence.

Additionally, the MT113 series is designed with robust build quality in mind. The devices are constructed to withstand the rigors of daily use, making them ideal for high-traffic environments. Their reliability is paramount, especially in corporate settings where presentations can significantly impact outcomes.

Moreover, both models are compact and can be easily integrated into various setups, whether wall-mounted or placed on a tabletop. This flexibility allows organizations to adapt the equipment to their specific spatial and functional needs.

In conclusion, the Altinex MT113-101 and MT113-100 are sophisticated yet user-friendly solutions designed to elevate the presentation experience. With their versatile connectivity options, advanced scaling capabilities, and durable design, these devices are well-suited for a range of applications in educational and professional settings. Their combination of functionality and ease of use makes them a valuable addition to any AV setup.
Top Page Image Contents