JVC GR-DVM5 manual Attach and Locks, Camera

58ENPLAYBACK

BasicConnections(Cont.)

VCR/TV Connection (using AC Charger Station)

Please refer to your VCR and/or TV instruction manual(s) when connecting.

To AC outlet

Power cord

Mark

Power lamp
CAMERA
charger
indicator	TV

		Lock!
To S-VIDEO	Core		To S-VIDEO IN
	filter
OUT connector		S-VIDEO cable (provided)	connector
	Yellow to VIDEO		Red to AUDIO R
		VIDEO/AUDIO		To
	White to AUDIO L	cable (provided)	White to AUDIO L	TV or
				VCR
		Core filter	Yellow to VIDEO

Red to AUDIO R

1 CONFIRM POWER-OFF STATUS Make sure the camcorder’s power is off.

2 ATTACH AND LOCKS

Align the mark on the camcorder with the one on the AC Charger Station and slide the camcorder to the AC Charger Station in the direction of the arrow. Slide the lock lever on the AC Charger Station in the direction of the arrow until it clicks. The camcorder and the AC Charger Station are now securely attached.

•When removing the camcorder, press the Release button and slide the lock lever in the opposite direction of the arrow and detach the camcorder in the opposite direction of the arrow.

•The AC Charger Station cannot function using the camcorder’s battery pack.

To VIDEO/AUDIO

IN connectors

Connect when the S-VIDEO	VCR
cable is not used

3 CONNECT AC CHARGER STATION TO TV OR VCR

Connect as shown in the illustration above and plug the AC Charger Station’s power cord into an AC outlet.

If Using A VCR . . . go to step 4.

If not . . . go to step 5.

4 CONNECTINPUT VCR OUTPUT TO TV Refer to your VCR’s instruction manual.

5 TURN ON POWER

Turn the Power Dial to “PLAY” while pressing down the lock button located on the dial and turn on the TV/VCR.

6 SELECT TV’S VIDEO MODE

Set the TV to the channel or mode appropriate for video playback.