JVC AX-V55BK manual Selecting the Front Speakers, Adjusting the Volume, Muting the Sound

Page 11

Selecting different sources for picture and sound

You can watch picture from video equipment while listening to sound from audio equipment.

To listen to the sound from audio equipment while watching the picture from video equipment:

1.Select the video equipment as the source (VIDEO or VCR).

2.Press one of the source buttons for the audio equipment (TUNER, TAPE, PHONO or CD) on the remote control.

Selecting the Front Speakers

 

 

When you have connected two sets of front speakers, you can select which to use. Pressing SPEAKERS 1 or

 

 

SPEAKERS 2 activates the respective set of speakers.

 

SPEAKERS

To use the set of speakers connected to the FRONT SPEAKERS 1terminals, press SPEAKERS 1 to set

1

 

2

it in the _ON position, and press SPEAKERS 2 to set it in the ÑOFF position.

_ON ÑOFF

To use the set of speakers connected to the FRONT SPEAKERS 2terminals, press SPEAKERS 2 to set

 

 

it in the _ON position, and press SPEAKERS 1 to set it in the ÑOFF position.

 

To use both sets of speakers, press both SPEAKERS 1 and 2 to set them in the _ON position.

 

To use neither set of speakers, press both SPEAKERS 1 and 2 to set them in the ÑOFF position.

 

Note:

 

When only one set of the front speakers is connected to either the FRONT SPEAKERS 1 or 2 terminals, do

 

not press both SPEAKERS 1 and 2 to set them in the _ON position. If you do, no sound comes out of the front

 

speakers.

Adjusting the Volume

 

MASTER VOLUME

On the front panel:

–

+

To increase the volume, turn MASTER VOLUME clockwise.

To decrease the volume, turn it counterclockwise.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When you turn MASTER VOLUME rapidly, the volume level also changes rapidly.

 

 

 

 

 

 

 

When you turn MASTER VOLUME slowly, the volume level also changes slowly.

 

 

On the front panel

From the remote control:

 

 

 

 

 

 

 

To increase the volume, press VOLUME +.

 

 

 

 

 

 

 

To decrease the volume, press VOLUME –.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

– VOLUME +

 

 

CAUTION:

 

Always set the volume to the minimum before starting any source. If the volume is set at its high

From the remote control

level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your

speakers.

 

 

 

English

Muting the Sound

MUTE

From the remote control only:

Press MUTE to mute the sound through all speakers and headphones connected. “MUTE” appears on the display and the volume turns off.

To restore the sound, press MUTE again so that “OFF” appears on the display.

Turn MASTER VOLUME or pressing VOLUME +/– also restores the sound at the previous volume level.

Page 10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents AX-V55BK Table of Contents Front Panel Switches, Buttons and ControlsRemote Control Getting Started Before InstallationChecking the Supplied Accessories Connecting the rear and center speakers Connecting the SpeakersConnecting the front speakers About the speaker impedance of the speakers Case 1 When you connect only front speakersCase 2 When you connect front speakers and a center speaker Case 3 When you connect front and rear speakersAudio Components Video Components Connecting Audio/Video ComponentsConnecting the subwoofer speaker Audio component connectionsVCR Video component connectionsPress Power to set it in the on position Connecting the Power CordPutting Batteries in the Remote Control Plug the power cord into an AC outletSelecting the Source to Play Turning the Power On and Off StandbyBasic Operations Selecting different sources for picture and sound Adjusting the VolumeSelecting the Front Speakers Muting the SoundRecording a Source Listening with HeadphonesHeadphones and your hearing To listen with only headphonesUsing the Sleep Timer Basic SettingsAdjusting the Front Speaker Output Balance Listening at Low Volume LoudnessSmall Selecting the Center Speaker SizeLarge One Touch Operation Using the One Touch OperationTo store the sound settings Press ONE Touch Operation To cancel the One Touch Operation functionSelecting Your Favorite SEA Mode Using the Preset SEA ModesPress Preset to select the effect level On JVC’s Hall Surround Using the Surround ProcessorUsing JVC’s Hall Surround What is surround?Press Delay to adjust the delay time DelayPress Rear +/- to adjust the rear speaker output level This case Speaker Arrangements for Dolby SurroundPreparing for Dolby Surround Left front Center Right front Speaker Rear speakers If necessary, adjust the speaker output balance as followsPress Test again to stop the test tone Press Test to start checking the speaker output balanceLOGIC, Hall lights up on the display Using Dolby SurroundSynchronized Recording Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Amplifier Automatic Source SelectionDisplay Using the Remote ControlAudio SEA Surround Control ON/OFF Problem Possible Cause Solution TroubleshootingGeneral SpecificationsAmplifier EN, GE, FR, NL, SP, IT 0199HIMMDWJEM

AX-V55BK specifications

The JVC AX-V55BK is a powerful stereo integrated amplifier that exemplifies the brand's commitment to quality audio performance and innovative technology. Designed for audiophiles and casual listeners alike, the AX-V55BK provides a compelling combination of features, ensuring an immersive listening experience whether you're enjoying your favorite vinyl records, CDs, or streaming music.

One of the standout characteristics of the AX-V55BK is its robust amplification capabilities. With a power output of 100 watts per channel into 8 ohms, this amplifier delivers a dynamic sound with clarity and detail. The power is more than sufficient to drive a wide range of speakers, resulting in powerful bass response and a rich midrange.

The JVC AX-V55BK employs a high-fidelity power supply, which enhances overall sound quality and performance. The use of discrete components in its construction ensures reduced distortion, allowing for a more accurate reproduction of sound. This attention to detail is essential for listeners who appreciate audio detail and clarity, especially when playing complex musical passages.

Another significant feature of the AX-V55BK is its multiple input options. The amplifier is equipped with a range of inputs including phono, CD, and AUX, providing flexibility for connecting different audio sources. A dedicated phono input is particularly noteworthy, allowing enthusiasts to connect a turntable directly, catering to the growing vinyl resurgence among music lovers.

The amplifier also incorporates JVC’s proprietary technologies to further enhance the listening experience. This includes the use of sophisticated circuit designs that minimize noise and improve signal integrity. The result is a clean and powerful output that preserves the nuances of the original recording.

User convenience has not been overlooked in the design of the AX-V55BK. The unit features a sleek and elegant front panel with intuitive controls, allowing users to easily adjust volume, select inputs, and set other parameters. Additionally, its compact form factor means it can fit seamlessly into any home audio system setup.

In conclusion, the JVC AX-V55BK stands out as a premium integrated amplifier, offering a blend of power, precision, and modern connectivity. Whether you're an audiophile seeking superior sound quality or a casual listener looking for a reliable audio solution, the AX-V55BK provides an exceptional audio experience that caters to diverse needs and preferences. With its combination of solid performance and sophisticated design, it continues to be a sought-after choice in home audio systems.
Top Page Image Contents