JVC AX-V55BK manual Delay, Press Rear +/- to adjust the rear speaker output level

ADJUST

SURROUND

ON/OFF

AUDIO

CONTROL

SURR MODE

6

–REAR +

8 9

DELAY

5

3.Press ADJUST so that the Control %/ Þ/ @/ #buttons work for surround settings. The lamp above the button lights up.

4.Press Control %/ Þuntil “– REAR +” appears on the display.

5.Press Control @/ #to adjust the rear speaker output level.

•Pressing Control @decreases the output level up to –10 dB.

•Pressing Control #increases the output level up to +10 dB.

6.Press Control %/ Þuntil “–DELAY +” appears on the display.

7.Press Control @/ #to adjust the delay time of the rear speaker output. Each time you press the button, the delay time changes as follows:

DELAY 1 DELAY 2 DELAY 3

DELAY 1	Select this when the distance from you to your rear speakers is greater than that to the front
	speakers.
DELAY 2	Select this when the distance from you to your rear speakers is almost equal to that to the
	front speakers.
DELAY 3	Select this when the distance from you to your rear speakers is less than that to the front
	speakers.

To cancel the Hall surround, select “OFF” in step 2. The HALL indicator goes off.

From the remote control:

1.Press SURROUND ON/OFF so that one of the surround mode indicators (PRO LOGIC, 3CH LOGIC, HALL) lights up on the display.

The previous mode is recalled (at its previous settings) and is shown on the display. Each time you press the button, the surround mode turns on and off.

2.Press AUDIO CONTROL so that 10 keys work for adjusting the sound.

3.Press SURR MODE until “HALL” appears on the display. The HALL indicator also lights up on the display.

Each time you press the button, the surround modes change as follows:

PROLOGIC 3CHLOGIC HALL

The indicator of the selected surround mode lights up in turn as you select the surround modes.

4.Press REAR +/– to adjust the rear speaker output level.

•Pressing REAR –decreases the output level up to –10 dB.

•Pressing REAR + increases the output level up to +10 dB.

5.Press DELAY to adjust the delay time.

Each time you press the button, the delay time changes as follows:

DELAY 1 DELAY 2 DELAY 3

To cancel the Hall Surround, press SURROUND ON/OFF so that the HALL indicator goes off. Each time you press the button, the surround mode turns on and off.

English

Page 18