JVC AX-V55BK manual Connecting the Power Cord, Putting Batteries in the Remote Control

Page 9

Connecting the Power Cord

 

Before plugging the amplifier into an AC outlet, make sure that all connections have been made.

 

1. Plug the power cord into an AC outlet.

POWER

2. Press POWER to set it in the _ON position.

 

The STANDBY lamp lights up. A small amount of power is always consumed.

_ON ÑOFF

 

 

To shut off the power completely:

 

Press POWER to set it in the ÑOFF position.

 

Keep the power cord away from the connecting cables for the TV, VCR, and antenna. The power cord may

 

cause noise or screen interference.

The difference between the POWER switch and the STANDBY/ON button

•The POWER switch is the mains supply switch, allowing the amplifier to connect to the mains supply. To shut off the power completely, press the POWER switch to set it in the ÑOFF position.

•The STANDBY/ON button is a functional on/off (standby) switch, and does not disconnect the amplifier from the mains supply. A small amount of power is consumed even in standby mode for the amplifier to accept signals from the remote control.

Notes:

The preset settings such as sound adjustment may be erased in the following cases:

•When you press POWER to set it in the ÑOFF position.

•When you unplug the power cord.

•When a power failure occurs.

CAUTIONS:

•Do not touch the power cord with wet hands.

•Do not pull on the power cord to unplug the amplifier. When unplugging the amplifier, always grasp the plug itself so as not to damage the cord.

Putting Batteries in the Remote Control

Before using the remote control, put the two supplied batteries in first. When using the remote control, aim the remote control directly at the remote sensor on the amplifier.

1.On the back of the remote control, press down on the battery cover and slide it out.

2.Insert batteries. Make sure to observe the proper polarity: (+) to (+) and (–) to (–).

3.Slide the cover.

R6P (SUM-3)/AA (15F)

If the range or effectiveness of the remote control decreases, replace the batteries. Use two R6P (SUM-3)/ AA (15F) type dry-cell batteries.

CAUTIONS:

Follow these precautions to avoid leaking or cracking cells:

•Place batteries in the remote control so they match the polarity indicated: (+) to (+) and (–) to (–).

•Use the correct type of batteries. Batteries that look similar may differ in voltage.

•Always replace both batteries at the same time.

•Do not expose batteries to heat or flame.

English

Page 8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents AX-V55BK Table of Contents Switches, Buttons and Controls Remote ControlFront Panel Before Installation Checking the Supplied AccessoriesGetting Started Connecting the Speakers Connecting the front speakersConnecting the rear and center speakers Case 2 When you connect front speakers and a center speaker Case 1 When you connect only front speakersCase 3 When you connect front and rear speakers About the speaker impedance of the speakersConnecting the subwoofer speaker Connecting Audio/Video ComponentsAudio component connections Audio Components Video ComponentsVCR Video component connectionsPutting Batteries in the Remote Control Connecting the Power CordPlug the power cord into an AC outlet Press Power to set it in the on positionTurning the Power On and Off Standby Basic OperationsSelecting the Source to Play Selecting the Front Speakers Adjusting the VolumeMuting the Sound Selecting different sources for picture and soundHeadphones and your hearing Listening with HeadphonesTo listen with only headphones Recording a SourceAdjusting the Front Speaker Output Balance Basic SettingsListening at Low Volume Loudness Using the Sleep TimerSelecting the Center Speaker Size LargeSmall To store the sound settings Press ONE Touch Operation Using the One Touch OperationTo cancel the One Touch Operation function One Touch OperationSelecting Your Favorite SEA Mode Using the Preset SEA ModesPress Preset to select the effect level Using JVC’s Hall Surround Using the Surround ProcessorWhat is surround? On JVC’s Hall SurroundDelay Press Rear +/- to adjust the rear speaker output levelPress Delay to adjust the delay time This case Speaker Arrangements for Dolby SurroundPreparing for Dolby Surround Left front Center Right front Speaker Rear speakers If necessary, adjust the speaker output balance as followsPress Test again to stop the test tone Press Test to start checking the speaker output balanceLOGIC, Hall lights up on the display Using Dolby SurroundRemote Control through the Remote Sensor on the Amplifier Compu Link Remote Control SystemAutomatic Source Selection Synchronized RecordingDisplay Using the Remote ControlAudio SEA Surround Control ON/OFF Problem Possible Cause Solution TroubleshootingSpecifications AmplifierGeneral EN, GE, FR, NL, SP, IT 0199HIMMDWJEM

AX-V55BK specifications

The JVC AX-V55BK is a powerful stereo integrated amplifier that exemplifies the brand's commitment to quality audio performance and innovative technology. Designed for audiophiles and casual listeners alike, the AX-V55BK provides a compelling combination of features, ensuring an immersive listening experience whether you're enjoying your favorite vinyl records, CDs, or streaming music.

One of the standout characteristics of the AX-V55BK is its robust amplification capabilities. With a power output of 100 watts per channel into 8 ohms, this amplifier delivers a dynamic sound with clarity and detail. The power is more than sufficient to drive a wide range of speakers, resulting in powerful bass response and a rich midrange.

The JVC AX-V55BK employs a high-fidelity power supply, which enhances overall sound quality and performance. The use of discrete components in its construction ensures reduced distortion, allowing for a more accurate reproduction of sound. This attention to detail is essential for listeners who appreciate audio detail and clarity, especially when playing complex musical passages.

Another significant feature of the AX-V55BK is its multiple input options. The amplifier is equipped with a range of inputs including phono, CD, and AUX, providing flexibility for connecting different audio sources. A dedicated phono input is particularly noteworthy, allowing enthusiasts to connect a turntable directly, catering to the growing vinyl resurgence among music lovers.

The amplifier also incorporates JVC’s proprietary technologies to further enhance the listening experience. This includes the use of sophisticated circuit designs that minimize noise and improve signal integrity. The result is a clean and powerful output that preserves the nuances of the original recording.

User convenience has not been overlooked in the design of the AX-V55BK. The unit features a sleek and elegant front panel with intuitive controls, allowing users to easily adjust volume, select inputs, and set other parameters. Additionally, its compact form factor means it can fit seamlessly into any home audio system setup.

In conclusion, the JVC AX-V55BK stands out as a premium integrated amplifier, offering a blend of power, precision, and modern connectivity. Whether you're an audiophile seeking superior sound quality or a casual listener looking for a reliable audio solution, the AX-V55BK provides an exceptional audio experience that caters to diverse needs and preferences. With its combination of solid performance and sophisticated design, it continues to be a sought-after choice in home audio systems.
Top Page Image Contents