JVC LST0450-001B Iris Iris Terminal, VIDEO,DC Iris Selector Switch, Rotation-preventive hole

Page 13

D[IRIS] Iris Terminal

This is connected to an automatic iris control lens.

E[VIDEO,DC] Iris Selector Switch

This should be set according to the type of lens if an automatic iris control lens is used.

VIDEO	:	In case of lens with EE amp built-in
DC	:	In case of lens without EE amp built-in

(Default setting: DC)(A Pg. 18)

F[LEVEL] Iris Level Adjustment Dial

This adjusts the iris level of the automatic iris control lens. Usually, adjustment is not required. When it is necessary, adjust the iris level according to the condition of the object. (A Pg. 28)

To darken : Anti-clockwise direction (Towards L)

To brighten : Clockwise direction (Towards H)

GRotation-preventive hole

Make use of this rotation-preventive hole to prevent any fall when mounting the camera. Always make sure that the camera is securely mounted.

HCamera-mounting screw hole (1/4-20UNC)

Use this hole when mounting the camera onto a fixer, pan/tilt unit and the like. Use a screw shorter than 7 mm. (A Pg. 23)

Note:

●Do not use a screw that is longer than the specified length. It may damage the internal parts.

ICamera-mounting bracket

The bracket has been attached on the bottom of the camera before shipment. It can also be attached on the top according to the circumstance. (A Pg. 24)

J[BF LOCK] Back focus fastening screw

This serves to fix the back focus adjustment mechanism. (A Pg. 26)

13

Image 13

Contents TK-C926EG For USA Important SafeguardsPage Introduction Safety PrecautionsInformation for USA Business users Other Countries outside the European Union Sehr geehrter Kunde, sehr geehrte Kundin Power SystemHow to read this manual Conventions and symbols Features Realizing a High Picture Quality Day/Night surveillanceContents Maintenance Operating PrecautionsStorage and Location of Use Energy ConservationOthers Name of Parts and their Functions Back focus adjustment ringFront/Bottom/Side panel Lens MountLevel Iris Level Adjustment Dial VIDEO,DC Iris Selector SwitchIris Iris Terminal Rotation-preventive hole TK-C925 Back panel TK-C926EG Video OUT Video signal output connector AC24V,DC12V Power input terminalSELECTOR/SET Selector switch/Set button INT,LL Selector Switch for Synchronizing SystemMounting Screw for Fall Prevention Wire Power Power indicator lampAC 220 V-240 V power cord Flow for Connection/Settings Mounting the lens Check the mounting method of the lens before mounting Lens Flange back b Dimension aGND Memo Connecting the back panelVideo signal coaxial cable Connecting the power cable TK-C925 AC24 V or DC12 TK-C926EG AC 220 V-240 Alarm output terminal Connecting alarm input/output terminalMounting the camera Mounting the camera-mounting bracket on top of the camera Fall Prevention Precautions regarding fall preventionAdjusting the back focus With a zoom lens With a fixed-focus lensAdjusting the lens Level adjustment Error display Adjusting the auto white balanceAWC Error NG Object Object error Adjustment is completeAWC Error LOW Light Insufficient Illumination AWC Error High Light Excessive IlluminationMenu basic operation SettingPress the Menu button Press the SET buttonPress the Menu button again Flow of menu screen Page AUX Function screen AUX ModeTITLE/VIDEO screen Shutter Balance AWCMode Speed Shutter ManualAuto LimitGain High Gain MAXSuper FIXColour Acolorb display differs depending on the modelTK-C925E TK-C926EGTo be absolutely certain of B&W/Color switching, we Color ModeLevel Color AutoLOW TimeDisplay screen BLC ModeOFF MonitorMaintenance screen LL Adjustment screenPhase CCD SpotCancel Factory Setting screenClearwith OUT TitleDetailed setting Camera title settingRepeat steps 2. to How to operate Menu operation StateW.BALANCE Adjust screen is displayed Manual adjustment of white balanceMemo Press the Menu button twice Output of B&W/Color switching signalSetting is complete and the screen returns to the main menu AUX Mode Input Polarity Control by B&W/Color switching signal from externalAUX Modeir Input Polarity Make Menureturn Specifications Power consumption General Power supplyAmbient temperature Accessories Dimensions Unit mm TK-C925U/E TK-C926EG C926EG