JVC LST0450-001B manual Connecting alarm input/output terminal, Alarm output terminal

Page 22

Setup

Connecting the back panel (continued)

Connecting alarm input/output terminal

Alarm input terminal

Connect infrared sensor, door sensor, metal sensor or sensor of manual switch and the like.

●To prevent noise from entering the internal circuit, supply non-voltage setting signal.

●Do not supply voltage.

●Can be set via menu whether to set to alarm when the contact is short (MAKE), or when the contact is open (BREAK). (A Pg. 37)

●Supply such that the alarm signal continues for more than 200 ms. The recognition of alarm signal may not be guaranteed if less than 200 ms.

IN

GND

CLASS 2 ONLY(U TYPE)			SEE INSTRUCTION
ISOLATED POWER ONLY(E TYPE)			SEE INSTRUCTION
			MANUAL
				POWER
+	-	DC12V d	INT	LL
1	2	AC24V H

MENU

SET

VIDEO OUT

SELECTOR

Alarm output terminal

Connect to alarm devices such as alarm, indicator, light or buzzer.

●As it is an open type collector output insulated by photocoupler, it will turn on during alarm.

●This terminal has polarity. Make sure to connect such as the voltage of + terminal is higher than - terminal. It will be damaged if reverse voltage is supplied.

OUT +

22

OUT -

22

Image 22

Contents TK-C926EG Important Safeguards For USAPage Safety Precautions IntroductionInformation for USA Business users Other Countries outside the European Union Power System Sehr geehrter Kunde, sehr geehrte Kundin Realizing a High Picture Quality FeaturesHow to read this manual Conventions and symbols Day/Night surveillanceContents Storage and Location of Use Operating PrecautionsMaintenance Energy ConservationOthers Front/Bottom/Side panel Back focus adjustment ringName of Parts and their Functions Lens MountIris Iris Terminal VIDEO,DC Iris Selector SwitchLevel Iris Level Adjustment Dial Rotation-preventive hole TK-C925 Back panel TK-C926EG SELECTOR/SET Selector switch/Set button AC24V,DC12V Power input terminalVideo OUT Video signal output connector INT,LL Selector Switch for Synchronizing SystemMounting Screw for Fall Prevention Wire Power Power indicator lampAC 220 V-240 V power cord Flow for Connection/Settings Mounting the lens Check the mounting method of the lens before mounting Lens Flange back b Dimension a GND Connecting the back panel Memo TK-C925 AC24 V or DC12 Connecting the power cableVideo signal coaxial cable TK-C926EG AC 220 V-240Connecting alarm input/output terminal Alarm output terminalMounting the camera Mounting the camera-mounting bracket on top of the camera Precautions regarding fall prevention Fall PreventionAdjusting the back focus With a fixed-focus lens With a zoom lensAdjusting the lens Level adjustment Adjusting the auto white balance Error displayAWC Error LOW Light Insufficient Illumination Adjustment is completeAWC Error NG Object Object error AWC Error High Light Excessive IlluminationPress the Menu button SettingMenu basic operation Press the SET buttonPress the Menu button again Flow of menu screen Page AUX Mode AUX Function screenTITLE/VIDEO screen Shutter Balance AWCMode Auto Shutter ManualSpeed LimitGain Super Gain MAXHigh FIXTK-C925E Acolorb display differs depending on the modelColour TK-C926EGColor Mode To be absolutely certain of B&W/Color switching, weLOW Color AutoLevel TimeOFF BLC ModeDisplay screen MonitorPhase LL Adjustment screenMaintenance screen CCD SpotClearwith Factory Setting screenCancel OUT TitleCamera title setting Detailed setting How to operate Menu operation State Repeat steps 2. toManual adjustment of white balance W.BALANCE Adjust screen is displayedMemo Output of B&W/Color switching signal Press the Menu button twiceSetting is complete and the screen returns to the main menu Control by B&W/Color switching signal from external AUX Mode Input PolarityAUX Modeir Input Polarity Make Menureturn Specifications Ambient temperature General Power supplyPower consumption Accessories Dimensions Unit mm TK-C925U/E TK-C926EG C926EG