1.Place a white object at the center of the screen, under the same lighting condition as the object to be shot and zoom in to fill the screen with white.
2.
3.
Press the SET button for approx. one second.
Auto white balance adjustment begins. During operation, AAWC OPERATIONB is displayed on the screen.
Adjustment is complete.
When the appropriate white balance is acquired, AAWC OKB is displayed.
Error display
When auto white balance adjustment is not successful, the following messages will be blinking on the monitor.
AWC ERROR : NG OBJECT (Object error)
Displayed when there is not enough white color on an object or the color temperature is not suitable.
Shoot a white object to fill the screen thoroughly and adjust the white balance again.
AWC ERROR : LOW LIGHT (Insufficient Illumination)
Displayed when the light is low. Increase the illumination, then readjust the white balance.
AWC ERROR : HIGH LIGHT (Excessive Illumination)
Displayed when the light is too bright. Decrease the illumination, then readjust the white balance.
31