Altinex DA1912SX manual Application Diagram Installing Your Distribution Amplifier

Page 6

 

DISTRIBUTION AMPLIFIERS

APPLICATION DIAGRAM

5

 

 

 

 

 

INSTALLING YOUR DISTRIBUTION

AMPLIFIER

6

Step 1. Make sure that the proper power supply is being used with the unit. The use of an incorrect power supply can result in equipment damage not covered by warranty.

Step 2. Connect the power cord to the unit and plug it into the power outlet. The power indicator LED on the front panel will light. This indicates that the unit is operational.

Step 3. Connect the high resolution RGsB or RGBS source to the DA1912SX using coaxial cable with BNC connectors, making sure that the colors match correctly. Then connect one or two monitors or projectors to the output(s) of the DA1912SX. The monitors or projectors must be scan-rate compatible with the source signal - the DA1912SX does not affect scan rate.

Step 4. The Input Termination switch should normally be ON unless the input is being looped to another unit. If the output cables are longer than 100 feet, consider using the Video Level Switch to increase the gain on the outputs of the DA1912SX. The Sync Level switch should normally be in the 4V position.

Step 5. If the image is less than perfect, check all the connections. The unit is very reliable and seldom will be the cause of malfunction. Poor quality cables may often degrade the performance of the product. Make sure that the cables used are coaxial cables and that all pins are in good condition.

CONGRATULATIONS! YOU ARE DONE.

If you experience any problems, please call

1-800-258-4623 or 1-714-990-2300 for

international calls.

5

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents DA1912SX Table of Contents IntroductionPrecautions / Safety Warnings Technical Specifications About Your Distribution AmplifierDescription of DA1912SX Application Diagram Installing Your Distribution Amplifier CONGRATULATIONS! YOU are DoneOperation Accessories Model NoFrequently Asked Questions DA1912SXAltinex Policy Troubleshooting GuideLimited Warranty Return Policy

DA1912SX specifications

The Altinex DA1912SX is a versatile and robust audio-visual distribution amplifier, designed to meet the demands of modern AV systems in commercial and residential environments. This device enhances signal integrity and ensures optimal distribution of video signals across multiple outputs, making it an essential component in complex AV setups.

One of the primary features of the DA1912SX is its ability to support a wide range of video formats. It handles both standard and high-definition video signals, including 1080p, and can accommodate various input sources such as HDMI and component video. This flexibility makes it an ideal choice for both traditional and cutting-edge AV installations.

The DA1912SX offers 1 input and 12 outputs, allowing users to effectively distribute a single source signal to multiple display devices. This capability is particularly beneficial in situations like conference rooms, classrooms, and auditoriums where multiple screens may be needed to ensure visibility for a large audience. With its high bandwidth capacity, the DA1912SX minimizes signal degradation and ensures that quality remains consistent across all output channels.

In terms of technical characteristics, the DA1912SX incorporates advanced signal processing technology that boosts weak signals without introducing noise. This is essential for maintaining the integrity of the audio and video output over long cable runs. The unit is designed to support EDID management, allowing for seamless communication between sources and displays, which optimizes the video resolution and minimizes compatibility issues.

Another noteworthy aspect of the Altinex DA1912SX is its user-friendly interface. It features GPIO (General Purpose Input/Output) capabilities for integrating with external control systems, enabling users to automate their AV setups effortlessly. The sleek and compact design of the device allows for easy installation in racks or on tables, demonstrating its adaptability in various environments.

Additionally, the DA1912SX includes comprehensive status indicators and diagnostic features. This ensures that users can quickly troubleshoot any issues that may arise, thus enhancing overall system reliability.

In summary, the Altinex DA1912SX audio-visual distribution amplifier is engineered for high performance and reliability, making it a go-to solution for professionals seeking to deliver superior audio-visual experiences. Its robust features, extensive compatibility, and ease of integration position it as an invaluable tool in any advanced AV system.
Top Page Image Contents