JVC GR-AX920 manual Using Menu For Detailed Adjustment, Access Menu Screen, Make Setting

28

MENU

RECORDINGAdvancedFeatures(cont.)

Using Menu For Detailed Adjustment

+

FAR		NEAR
		–
	Gain Up	S . LX
	Tele Macro	OFF
	Interval Timer	OFF
	Rec Time	OFF
	JLIP ID NO .	07
	Tally	ON
	Set Character
	Date/Time
	END :MENU KEY
	Gain Up	NORM
	Tele Macro	ON
	Interval Timer	1min
	Rec Time	1/2s
	JLIP ID NO .	07
	Tally	ON
	Set Character
	Date/Time

END :MENU KEY

PAUSE

This camcorder is equipped with Program Manager, an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings.

SELECT MODE

1 Turn the PROGRAM AE select dial to any position except AUTO LOCK.

ACCESS MENU SCREEN

2 Press MENU.

SELECT FUNCTION

3 Press + or – to place the highlight bar on the desired function.

MAKE SETTING

4 The setting procedure depends on the function you select.

If you select Gain Up, Tele Macro, Interval Timer, Rec Time, JLIP ID NO or Tally. . . .

.... press FAR or NEAR to cycle through the choices

until the desired setting appears.

If you select Set Character or Date/Time, . . .

.... press NEAR to access the selection menu for

each function (Set Character – ☞ pg. 25; Date/ Time – ☞ pg. 11).

CLOSE MENU

5 Press MENU. The normal screen reappears.

NOTE:

The menu is available only in the Record-Standby mode.

If Gain Up or Tele Macro in the Menu has been changed from the factory settings, this mark appears in the viewfinder.