JVC GR-AX920 manual Connect Camcorder to VCR, Connect Camcorder to TV

PLAYBACK Basic Connections

33

There are three basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals.

Connection To A VCR [A] (Editing, Dubbing and Playback)

NOTE:

When connecting the cables, open the jack cover.

A

To AUDIO and VIDEO connectors

Audio and Video cables (optional)

To AUDIO and

VIDEO IN connectors

B

Use the optional Audio and Video cables.

CONNECT CAMCORDER TO VCR

1 As shown in the illustration at left, connect the optional Audio and Video cables between the AUDIO and VIDEO connectors on the camcorder and those on the VCR.

SUPPLY POWER

2 Turn on the camcorder, the VCR and the TV.

SELECT MODE

VCR

Antenna

To AUDIO,

VIDEO and

RF DC OUT

connectors

RF unit RF-V5U(optional)

NOTES:

●It is recommended to use the AC Power Adapter/Charger as the power supply instead of the battery pack.

●To monitor the picture and sound from the camcorder without inserting a tape, set the camcorder’s Power switch to “CAMERA”, then set your TV to the appropriate input mode.

●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.

3 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

Connection To A TV With A/V Input Connectors [B] (Playback ONLY)

NOTE:

Use the optional Audio and Video cables.

CONNECT CAMCORDER TO TV

1 As shown in the illustration at left, connect the optional Audio and Video cables between the AUDIO and VIDEO connectors on the camcorder and those on the TV.

SELECT MODE

2 Set the TV to its VIDEO or AV mode (as specified in its instructions).

Connection To A TV With NO A/V Input Connectors (Playback ONLY)

NOTE:

Use the optional RF-V5U RF unit.

*Refer to the RF-V5U instruction manual for connection procedure.