OSD Output, REC Time, INT. Time, Tele Macro

OSD OUTPUT

ON: On-screen indications are displayed.

OFF: On-screen indications are turned off except Date/Time, Instant Title and Warning Indication.

REC TIME

You can shoot a series of pictures, each slightly different, of the same object for a brief selected period of time (Animation). REC MODE should be set to “SP”.

Select the desired recording time and press the Recording Start/Stop Button 9 after focusing on the subject.

•Fade- or wipe-in/out cannot be performed.

•This function is cancelled when the power is shut off or when the cassette is ejected.

•To use this function, it is recommended that SCROLL in TITLE SETUP ( pg. 18, 19) be set to “OFF”.

INT. TIME

You can record sequentially at preset time spans. Leaving the camcorder aimed at a specific subject, you can record subtle changes over an extended period of time (Time-Lapse). REC MODE should be set to “SP”.

(Please note that it is necessary to set the REC TIME (Animation) in the SYSTEM MENU before performing the INT. TIME (Time-Lapse) function.)

Select the desired interval time and press the Recording Start/Stop Button 9.

•Fade- or wipe-in/out cannot be performed.

•This function is cancelled when the power is shut off or when the cassette is ejected.

•To use this function, it is recommended that SCROLL in TITLE SETUP ( pg. 18, 19) be set to “OFF”.

TELE MACRO

When set to “ON”, you can shoot a subject as large as possible at a distance of approx. 60 cm (23-5/8"). Depending on the zoom position, the lens may go out of focus.