JVC GR-D340E/EK manual Operation Mode, Using AC Power, About Batteries, Auto/Manual Mode

14 EN	GETTING STARTED
Using AC Power			Operation Mode
Perform steps 4 – 6 in “Charging The Battery
		To turn on the camcorder, set the Power Switch
Pack”.
		to any operation mode except “OFF” while
NOTE:
		pressing down the Lock Button located on the
The provided AC Adapter features automatic		switch.
voltage selection in the AC range from 110 V to			POWER/
240 V.			Lock Button CHARGE
About Batteries			lamp

DANGER! Do not attempt to take the batteries	MENU
	AUTO
apart, or expose them to flame or excessive
heat, as it may cause a fire or explosion.
WARNING! Do not allow the battery or its
terminals to come in contact with metals, as this
can result in a short circuit and possibly start a
fire.
To resume the original function of the
accurate battery power indication	Choose the appropriate operation mode
If the battery power indication differs from the
actual operating time, fully charge the battery,	according to your preference using the Power
and then run it down. However this function may	Switch.
not turn back if the battery was used for a long	Power Switch Position
period of time under extremely high/low
temperature condition or charged too many	REC:
times.	● Allows you to perform recording on the tape.
	● Allows you to set various recording functions
	using the Menus. ( pg. 23)
	OFF:
	Allows you to switch off the camcorder.
	PLAY:
	● Allows you to play back a recording on the
	tape.
	● Allows you to set various playback functions
	using the Menus. ( pg. 23)
	Auto/Manual Mode
	Press AUTO button repeatedly to switch to auto/
	manual recording mode. When manual mode is
	selected, the indicator “M” appears on the LCD
	monitor.
	Auto Mode: A
	You can record using no special effects or
	manual adjustments.
	Manual Mode: M
	Manual recording is possible by setting various
	functions.