20 EN VIDEO RECORDING
NOTES:
●The time code cannot be reset.
●During
●The time code is displayed only when “TIME CODE” is set to “ON”. ( pg. 25)
Quick Review
Enables to check the end of the last recording.
1)Press QUICK REVIEW during the
2)Tape is rewound for about several seconds and played back automatically, then pauses in the
● Distortion may occur at start of playback. This is normal.
Recording From The Middle Of A Tape
1)Play back a tape or use Blank Search
( pg. 21) to find the spot at which you want to start recording, then engage the Still Playback mode. ( pg. 21)
2)Set the Power Switch to “REC” while pressing down the Lock Button located on the switch, then start recording.