JVC GR-D252 manual Grip Adjustment

14 EN GETTING STARTED
Power-Linked Operation			Date/Time Settings
When the Power Switch is set to “A” or “M”, you			The date/time is recorded onto the tape at all
can also turn on/off the camcorder by opening/
			times, but its display can be turned on or off
closing the LCD monitor or pulling out/pushing in
			during playback. ( pg. 24, 29)
the viewfinder.
			1 Perform steps 1 – 4 in “Language Settings”
INFORMATION:
The following explanations in this manual			on the left column.
supposes the use of LCD monitor in your			2 Press + or – to select “CLOCK ADJ.”, and
operation. If you want to use the viewfinder,			press MENU. The parameter for “Day” is
close the LCD monitor and pull out the			highlighted.
viewfinder fully.			3 Press + or – to input	CAMERA DISPLAY
Language Settings			the day, and press MENU.
			Repeat to input the month,
The language on the display can be changed.			year, hour and minute.
			4 Press + or – to select	CLOCK	2 0. 1 2 . 0 5
( pg. 24, 28, 29)				ADJ .	1 7 : 3 0
1 Set the Power Switch to “M” while pressing			“BRETURN”, and press
			MENU twice. The Menu
down the Lock Button located on the switch.			Screen closes.
2 Open the LCD monitor fully. ( pg. 18)			Grip Adjustment
3 Press MENU. The Menu Screen appears.
4 Press + or – to select			1 Adjust the velcro strip.
“n”, and press MENU.		– LCD / T V	2 Pass your right hand
The CAMERA DISPLAY		–
		–
Menu appears.	LANGUAGE	–	through the loop and grasp
	AUX MIC	–	the grip.
5 Press + or – to select
			3 Adjust your thumb and
“LANGUAGE”, and press
MENU.			fingers through the grip to
6 Press + or – to select			easily operate the
			Recording Start/Stop
the desired language, and			Button, Power Switch and
press MENU.
			Power Zoom Lever. Be
7 Press + or – to select	LANGUAGE	–
			sure to fasten the velcro strip to your preference.
		ENGLISH

“BRETURN”, and press MENU twice. The Menu Screen closes.