VIDEO PLAYBACK EN 21
●The detected blank portion may be located between recorded scenes. Before you start recording, make sure there is no recorded scene after the blank portion.
Connections To A TV Or VCR
1 Make sure all units are turned off.
2 Connect the camcorder to a TV or VCR as shown in the illustration.
If using a VCR, go to step 3. If not, go to step 4.
3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.
4
5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
To AV connector
S/AV cable (provided)
Open the cover.
mark
6 Start playback on the camcorder. ( pg. 20)
To choose whether or not the following displays appear on the connected TV
● Date/Time |
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. |
1 2 
3
4
TV
VCR
A Black to
B Yellow to VIDEO IN (Connect when your TV/ VCR has only A/V input connectors.)
C Red to AUDIO R IN* D White to AUDIO L IN*
*Not required for watching still images only.
( pg. 24, 29) |
Or, press DISPLAY on the remote control to turn |
on/off the date indication. |
● Time Code |
Set “TIME CODE” to “ON” or “OFF”. |
( pg. 24, 29) |
● Indications other than date/time and time code |
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. |
( pg. 24, 29) |
NOTES:
●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 13)
●To monitor the picture and sound from the camcorder without inserting a tape, set the camcorder’s Power Switch to “A” or “M”, then set your TV to the appropriate input mode.
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.
VIDEO RECORDING & PLAYBACK