JVC GR-DVL307, GR-DVL507 specifications 12 EN, Loading/Unloading a Cassette

Page 12

12 EN

Erase protection tab*

Make sure the window side is facing out.

Cassette holder

OPEN/EJECT Switch

 

 

 

 

 

 

 

 

 

 

Cassette holder cover

PUSH HERE

*To Protect Valuable Recordings . . .

.... slide the erase protection tab on the back of

the tape in the direction of “SAVE”. This prevents the tape from being recorded over. To record on this tape, slide the tab back to “REC” before loading it.

GETTING STARTED (cont.)

Loading/Unloading A Cassette

The camcorder needs to be powered up to load or eject a cassette.

1 Slide and hold OPEN/EJECT in the direction of the arrow then pull the cassette holder cover open until it locks. The cassette holder opens automatically.

•Do not touch internal components.

2 Insert or remove a tape and press “PUSH HERE” to close the cassette holder.

•Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette holder cover.

•When the battery’s charge is low, you may not be able to close the cassette holder cover. Do not apply force. Replace the battery with a fully charged one before continuing.

3 Close the cassette holder cover firmly until it locks into place.

Approximate recording time

Tape

Recording mode

 

 

 

SP

LP

 

 

 

30 min.

30 min.

45 min.

 

 

 

60 min.

60 min.

90 min.

 

 

 

80 min.

80 min.

120 min.

 

 

 

NOTES:

●It takes a few seconds for the cassette holder to open. Do not apply force.

●If you wait a few seconds and the cassette holder does not open, close the cassette holder cover and try again. If the cassette holder still does not open, turn the camcorder off then on again.

●If the tape does not load properly, open the cassette holder cover fully and remove the cassette. A few minutes later, insert it again.

●When the camcorder is suddenly moved from a cold place to a warm environment, wait a short time before opening the cassette holder cover.

●Closing the cassette holder cover before the cassette holder comes out may cause damage to the camcorder.

●Even when the camcorder is switched off, a cassette can be loaded or unloaded. After the cassette holder is closed with the camcorder switched off, however, it may not recede. It is recommended to turn the power on before loading or unloading.

●When resuming recording, once you open the cassette holder cover a blank portion will be recorded on the tape or a previously recorded scene will be erased (recorded over) regardless of whether the cassette holder came out or not. See page 19 for information about recording from the middle of a tape.

●Loosen the Grip Strap if it appears to interfere with the cassette holder cover operation (  pg. 10).

Page 11 Page 13
Image 12
Page 11 Page 13
Contents GR-DVL507 GR-DVL307 Dear Customer It is recommended that youPower Sources Power Cord ProtectionPower Lines Grounding or PolarizationAccessories CleaningDamage Requiring Service Replacement PartsSafety Precautions Make sure you only use cassettes with the Mini DV markBattery Pack BN-V408U Lens Cap Remote Control Unit RM-V716U GR-DVL507 only Shoulder StrapRemote Control Unit RM-V715U GR-DVL307 only Editing Cable DC CordAutomatic Demonstration Power Charging the Battery PackLithium-ion is vulnerable in colder temperatures About BatteriesUsing AC Power To Detach The Battery PackApproximate recording time For other notes,  pgGrip Adjustment Viewfinder Adjustment10 EN Shoulder Strap AttachmentDate/Time Settings EN1112 EN Loading/Unloading a CassetteRecording Mode Setting Set the tape recording mode depending on your preferenceEN13 To Adjust The Brightness Of The Display 14 ENPress in the tabs on the lens cap to remove it While recording is in progressEN15 Journalistic ShootingSELF-RECORDING OFFSnapshot Mode Selection Motor Drive Mode16 EN SnapshotEN17 Slide the Power Zoom Lever towards T 18 ENZoom Zoom OutWhen a blank portion is recorded on a tape EN19Proper recording Feature Video Light To brighten the scene when natural lighting is too dim20 EN Set Light OFF/AUTO/ON as requiredFeature Auto Focus Feature Manual FocusEN21 To obtain correct focusUsing Menus For Detailed Adjustment 22 ENSee pg If you have selected , orMenu Screen Explanations EN23Menu Screen Explanations EN25 26 EN Fade/Wipe EffectsPicture Wipe or Dissolve Selection To Deactivate The Selected EffectEN27 Fader And Wipe MenuTo Deactivate The Selected Mode 28 ENProgram AE With Special Effects Slow Slow ShutterExposure Control Iris LockEN29 White Balance Adjustment 30 ENTo Return To Automatic White Balance To Change The Tint For RecordingLoad a tape  pg Set the Power Switch to To Control The Speaker VolumeAvailable only with the remote control provided  pg EN3132 EN Playback Sound DisplayEN33 34 EN VCRIf using a VCR . . . go to step If not . . . go to step EN3536 EN Connection To a Personal ComputerConnection To a Video Unit Equipped With a DV Connector EN37Make sure all units are turned off  pg38 EN Dubbing To a VCRCore filter reduces interference YTU94146A S-Video cableEN39 To use this camcorder as a playerInstalling The Batteries RM-V716U or RM-V715U, provided Installing The Battery RM-V700U, optional40 EN EN41 ButtonsFunctions 42 EN Functions ButtonsFeature Slow-Motion Playback GR-DVL507 only Feature Frame-By-Frame Playback GR-DVL507 onlyFeature Playback Special Effects GR-DVL507 only EN43Feature Playback Zoom 44 ENPress Play 4 to find the scene of interest VCR Code List EN45SET REMOTE/VCR Code VCR Recording deckJVC VCR equipped with a remote pause connector 46 ENMake Connections VCR other than aboveEN47 Select ScenesRandom Assemble Editing Menu appears 48 EN Automatic Editing to VCRFor More Accurate Editing EN49Diagnosing VCR/CAMCORDER Timing Recording deckAdjustment of VCR/CAMCORDER Timing 50 ENSet 12BIT Mode to Sound 2 or MIX Menu Screen  pg Audio DubbingEN51 To hear the dubbed sound during playback52 EN Corrective Action Bright wheel54 EN EN55 When the LCD monitors 56 ENAngle of the LCD monitor WhitishOr channel appropriate Video mode For video playback EN5758 EN EN59 LCD Monitor/Viewfinder Indications During RecordingHead Cleaning Required USE Cleaning CassetteLCD Monitor/Viewfinder Indications During Playback Indications FunctionDUB Error Recording Check TAPE’S Erase Protection Switch Insert ErrorCheck TAPE’S Erase Protection Switch Copying Failed Unit in Safeguard62 EN 345 6 7 # $ %EN63 Cleaning The Camcorder Press Battery Release and remove the battery pack64 EN After UseTo prevent damage and prolong service life Temperature Range SpecificationsEN65 To avoid hazards66 EN EN67 For GR-DVL507 Owners68 EN Date/Time Display  pg , 32Icons  pg LCD monitor/Viewfinder  pg IndicationsEN69 Time Code  pg , 25, 3270 EN For GeneralFor Digital Video Camera For Connectors EN71GR-DVL307

GR-DVL507, GR-DVL307 specifications

The JVC GR-DVL307 and GR-DVL507 are both compact and user-friendly mini DV camcorders that have made a significant impact in the world of home video recording. Launched in the early 2000s, these models are celebrated for their ease of use, solid build quality, and a range of features that appeal to both novice and experienced videographers.

The GR-DVL307 is equipped with a 680,000-pixel pixel CCD sensor, which ensures that videos captured are of good quality, with vibrant colors and decent resolution. Its 16x optical zoom and 800x digital zoom capabilities allow users to capture distant subjects with clarity. The camera is designed with a 2.5-inch LCD screen that provides a clear view for composing shots and monitoring recordings. The built-in LED light is particularly useful for low-light situations, giving users the flexibility to shoot in various lighting conditions.

In terms of connectivity, the GR-DVL307 offers USB and FireWire ports, enabling seamless transfer of video to a computer for editing and sharing. The camera also supports various record modes, including long play and standard play, allowing users to optimize recording time based on their needs. The inclusion of digital image stabilization reduces the chances of shaky footage, enhancing the quality of the final product.

On the other hand, the GR-DVL507 builds upon the features of the 307 with some advanced capabilities. It features a larger, 1.33-megapixel CCD sensor that significantly improves image quality, ensuring sharper images and more detailed video. The GR-DVL507 also includes a more advanced optical zoom of 20x, providing greater versatility for capturing dynamic scenes. This model features a 3.5-inch LCD monitor, which enhances the viewing experience and simplifies frame composition.

Both models incorporate JVC's innovative Video Stabilization technology which further reduces unwanted motion blur. The GR-DVL507 additionally provides options for manual control over focus and exposure, appealing to more experienced users who want greater creative control over their recordings.

In summary, JVC's GR-DVL307 and GR-DVL507 camcorders represent excellent choices for those looking to capture video memories without compromising on quality or ease of use. With their combination of user-oriented features, solid technology, and portability, these camcorders continue to be valued by those who appreciate the art of home video making.
Top Page Image Contents