46 EN | USING THE REMOTE CONTROL UNIT (cont.) |
Connector |
cover** |
To S
Core filter
White to
AUDIO L IN
To AV To JLIP/ 
EDIT
Core filter
Core filter
Editing cable (provided)
Audio/Video cable (provided)
MAKE CONNECTIONS
Also refer to pg. 34 and 35.
1
A JVC VCR equipped with a remote pause connector . . .
... connect the editing cable to the Remote PAUSE connector.
A JVC VCR not equipped with a remote pause connector but equipped with an R.A. EDIT connector . . .
... connect the editing cable to the R.A.EDIT connector.
A VCR other than above . . .
... connect the editing cable to the remote control’s PAUSE IN connector.
2 Insert a recorded tape into the camcorder. Set the
Power Switch to “ 
” while pressing down the Lock Button located on the switch.
3 Turn the VCR power on, insert a recordable tape and engage the AUX mode (refer to the VCR’s instructions).
NOTES:
● Before Random Assemble Editing, make sure the |
indications do not appear on the TV monitor. If they do, |
Yellow to
VIDEO IN*
To
VCR
DISPLAY
TV |
Red to
AUDIO R IN
To Remote
PAUSE or
R.A.EDIT
To PAUSE IN
they will be recorded onto the new tape. |
To choose whether or not the following displays appear on the connected TV . . .
•Date/Time
.... set “DATE/TIME” to “ON” or “OFF” in the Menu
Screen ( pg. 32).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the Menu
Screen ( pg. 32).
•Playback Sound Mode, Tape Speed And Tape Running Displays
.... set “ON SCREEN” to “LCD” or “SIMPLE” in the Menu Screen ( pg. 32). Or, press DISPLAY on the remote control (provided with
● Use the provided cables, making sure to connect the |
end with a core filter to the camcorder. The core filter |
reduces interference. |
● The |
YTU94146A |
Consult the JVC Service Center described on the sheet |
*Connect when an
**When connecting cables, open this cover.
included in the package for details on its availability. |
Make sure to connect the end with a core filter to the |
camcorder. The core filter reduces interference. |
● When editing on a VCR equipped with a DV input |
connector, an optional DV cable can be connected |
instead of an |
ATTENTION FOR EDITING CABLE
Make sure you connect the end with the core filter to the camcorder.