JVC LYT0090-001B, GR-AX77, GR-AX47 manual 5SEC. REC Retake R/F, Feature, Quick Review

5SEC. REC

RETAKE (R/F)

Viewfinder

PAUSE

5S

5Sec. Rec mode indicator

		EN	19
FEATURE:	Quick Review
PURPOSE:	To check the end of the last
	recording.
OPERATION:	1) Press “ ” and release quickly
	during the Record-Standby mode.

■Tape is rewound for about 2 seconds and played back automatically, then pauses in Record-Standby mode for the next shot.

NOTE:	Distortion may occur at start of
	playback. This is normal.
FEATURE:	Retake
PURPOSE:	To re-record certain segments.
OPERATION:	1) Make sure the camcorder is in the
	Record-Standby mode.
	2) Press either RETAKE button to
	reach the start point for new
	recording. Pressing “F” forwards
	the tape and pressing “R” reverses
	it.
	3) Press Recording Start/Stop Button
	to start recording.
NOTE:	Noise may appear during Retake.
	This is normal.
FEATURE:	5Sec. Rec (5-sec. Recording)
PURPOSE:	To record a scene for 5 seconds,
	providing quick scene transitions like
	those seen in TV programmes.
OPERATION:	1) During Record-Standby, press
	5SEC. REC. “		5S” appears and
	5Sec. Rec is reserved.
	2) Press Recording Start/Stop Button.
	Recording starts, and after
	5-second recording is finished, the
	camcorder reenters the Record-
	Standby mode automatically.
	■ To cancel the 5Sec. Rec.
	function, press 5SEC. REC again
	so that “	5S” disappears.
NOTE:	The Fader (☞ pg. 24) cannot be
	activated by pressing 5SEC. REC.