LCD monitor or viewfinder
FINE 12Remaining number of shots
22 21 1 0 (Blinking)
Pictrue mode display:
FINE or STD (standard)
Pin-Up
A still image on a white background. A shadow effect is added to give it a three dimensional feel.
Full |
A still image that |
occupies the entire |
image field is recorded. |
EN25
NOTES:
●Six sample images have been stored in the
If you wish to delete them, first remove the “Protect” function (☞ pg. 59), then perform the “Delete” function (☞ pg. 60).
●When the remaining number indicator displays “0” (bliking), the still image will be recorded onto the tape but not in the
“DELETE” function in the Menu Screen to remove still images you do not need (☞ pg. 60).
●The Picture Mode can be switched to either “FINE” or “STANDARD”. Since the remaining number of shots available depends on the selected Picture Mode, switching the Picture Mode will vary this number.
●If the SNAPSHOT Button is pressed with the System Select Switch set to “D.S.C.”, the still image cannot be
recorded onto the tape, but will be stored in the camcorder's
●Image data stored in the camcorder’s
and saved using the provided image transfer software (☞ pg. 63). The image data transferred to a personal computer can also be further processed using Paint Software.
●When a
(☞ pg. 29) activated, the black bars at the top and bottom of the screen will disappear.
●When a Snapshot is taken in a dark environment, the still image recorded onto the tape and stored in memory will become coarse and its true colours will be lost.