MENU/BRIGHT Wheel
VIDEO/DSC Switch |
|
|
|
|
(Open the LCD monitor |
|
|
|
|
to access this switch.) |
| A | OFF | |
|
| L | Y | |
| P |
|
| |
|
|
|
|
EN37
Protecting Images
The Protect mode helps prevent the accidental erasure of images. When a padlock mark is displayed next to the Picture Quality Mode indication, that image cannot be deleted.
1 Set the VIDEO/DSC Switch to “ ”, then set the
Power Switch to “ ” while pressing down the Lock Button.
•A stored image is displayed.
2 Press MENU/BRIGHT. The Menu Screen appears. Rotate it to select “ ” and press it. “DSC MENU” appears.
3 Rotate MENU/BRIGHT to select “PROTECT” and press it. The PROTECT Index Screen appears.
Display
DSC MENU
1RE TURN
I NDEX
SL I DE SHOW
PROT ECT
DE L E TE
FORMAT
Lock Button
Power Switch
Menu Screen
TO PROTECT AN IMAGE
Before doing the following, perform steps 1 through 3 above.
4 Rotate MENU/BRIGHT to move the green frame to the desired image and press it. A “” padlock mark appears on the selected image.
Repeat this procedure for all images you do not wish to delete by accident.
5 Rotate MENU/BRIGHT upward to select “EXIT” and press it. The normal playback screen appears.
E X I T <P R O T E C T > |
| |
01 | 02 | 03 |
04 | 05 | 06 |
PROTECT Index Screen
Padlock mark
NOTE:
When the memory is initialised or corrupted, even protected images are deleted. If you do not want to lose important images, transfer them to a PC and save them.
TO REMOVE PROTECTION
Before doing the following, perform steps 1 through 3 above.
Normal playback | If Protection is |
| removed |
E X I T <P R O T E C T > |
| |
01 | 02 | 03 |
04 | 05 | 06 |
4 Rotate MENU/BRIGHT to move the green frame to the desired image and press it. The “” padlock mark located above the image disappears and the image is no longer protected.
Repeat this procedure for all images from which you wish to remove protection.
5 Rotate MENU/BRIGHT upward to select “EXIT” and press it. The normal playback screen appears.
Normal playback