46 EN | DUBBING (cont.) |
Dubbing Images Stored In The
Memory To A Tape
Images can be dubbed from the camcorder’s
1 Load a cassette ( pg. 10).
2 To locate the point where you wish to dub a still image, play back the tape. Stop playback at the desired point.
Power Switch |
|
| 32 |
|
| YOFF | |
| A |
| |
P | L |
|
|
Recording |
|
| 4 |
|
| 3 | |
Start/Stop Button |
|
| |
|
|
| |
Lock Button |
|
Set the VIDEO/DSC Switch to “ ”, then set the
Power Switch to “ ” while pressing down the Lock Button located on the switch.
To select a still image to be dubbed, perform Index Playback ( pg. 35) or press 2 or 3 to select the image you wish.
Rewind Button (2)
Button (3)
5 To engage
6 While the message is being displayed, press the Recording Start/Stop Button. The selected still image is recorded on the tape for approx. 5 seconds.
•The indicator disappears when dubbing is complete.
NOTE:
If the Recording Start/Stop Button is pressed in step 5 when the tape’s erase protection tab is set to “SAVE”, the message “COPYING FAILED” is displayed.
VIDEO/DSC Switch (Open the LCD monitor to access this switch.)
| Display |
TO COPY TO TAPE | |
PUSH | S TART / S TOP |
REC |
444 |