JVC GR-DVL815 specifications 12 EN, Loading/Unloading a Cassette, Approximate recording time

Page 12

12 EN

Erase protection tab*

Make sure the window side is facing out.

PUSH HERE

Cassette

 

holder

Cassette holder cover

OPEN/EJECT Switch

GETTING STARTED (cont.)

Loading/Unloading A Cassette

The camcorder needs to be powered up to load or eject a cassette.

1 Slide and hold OPEN/EJECT in the direction of the arrow then pull the cassette holder cover open until it locks. The cassette holder opens automatically.

•Do not touch internal components.

2 Insert or remove a tape and press “PUSH HERE” to close the cassette holder.

•Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette holder cover.

•When the battery’s charge is low, you may not be able to close the cassette holder cover. Do not apply force. Replace the battery with a fully charged one before continuing.

3 Close the cassette holder cover firmly until it locks into place.

*To Protect Valuable Recordings . . .

.... slide the erase protection tab on the back of

the tape in the direction of “SAVE”. This prevents the tape from being recorded over. To record on this tape, slide the tab back to “REC” before loading it.

Be sure to press only the section labeled “PUSH HERE” to close the cassette holder; touching other parts may cause your finger to get caught in the cassette holder, resulting in injury or product damage.

Approximate recording time

Tape

Recording mode

 

 

 

SP

LP

 

 

 

30 min.

30 min.

45 min.

 

 

 

60 min.

60 min.

90 min.

 

 

 

80 min.

80 min.

120 min.

 

 

 

NOTES:

●It takes a few seconds for the cassette holder to open. Do not apply force.

●If you wait a few seconds and the cassette holder does not open, close the cassette holder cover and try again. If the cassette holder still does not open, turn the camcorder off then on again.

●If the tape does not load properly, open the cassette holder cover fully and remove the cassette. A few minutes later, insert it again.

●When the camcorder is suddenly moved from a cold place to a warm environment, wait a short time before opening the cassette holder cover.

●Closing the cassette holder cover before the cassette holder comes out may cause damage to the camcorder.

●Even when the camcorder is switched off, a cassette can be loaded or unloaded. After the cassette holder is closed with the camcorder switched off, however, it may not recede. It is recommended to turn the power on before loading or unloading.

●When resuming recording, once you open the cassette holder cover a blank portion will be recorded on the tape or a previously recorded scene will be erased (recorded over) regardless of whether the cassette holder came out or not. See page 20 for information about recording from the middle of a tape.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents GR-DVL915 GR-DVL815 GR-DVL510 GR-DVL310 Dear Customer It is recommended that youImportant Safety Instructions Make sure you only use cassettes with the Mini DV mark Memory cards can be used with GR-DVL915/DVL815/DVL510 onlyRemote Control Unit RM-V716U GR-DVL915 Attachment AAA R03 Battery xAC Adapter MultiMediaCard MB GR-DVL915/ DVL815 only orHow To Attach The Lens Cap Automatic DemonstrationContents Getting StartedPower Charging the Battery PackTo Detach The Battery Pack Slide BAT. Release and pull out the battery packUsing the Battery Pack Using AC PowerAbout Batteries Selection in the AC range from 110 V to 240Grip Adjustment Viewfinder Adjustment10 EN Shoulder Strap AttachmentDate/Time Settings EN1112 EN Loading/Unloading a CassetteApproximate recording time Recording Mode Setting Set the tape recording mode depending on your preferenceEN13 Picture Quality Mode Setting Loading a Memory CardGR-DVL915/DVL815/DVL510 only To Unload a Memory CardContents Video Recording & PlaybackTo Adjust The Brightness Of The Display 16 ENVideo Recording Basic RecordingOperation Mode EN17Journalistic Shooting SELF-RECORDINGSlide the Power Zoom Lever towards T 18 ENZoom Zoom OutFeature Video Light To brighten the scene when natural lighting is too dimEN19 Set Light OFF/AUTO/ON as requiredWhen a blank portion is recorded on a tape 20 ENTime Code Proper recordingTo Control The Speaker Volume Video PlaybackNormal Playback EN2122 EN If using a VCR . . . go to step If not . . . go to step EN23Set on Screen to LCD or LCD/TV in the Menu Screen  pg To cancel Blank Search midway 24 ENBlank Search Press Blank SearchDigital Still Camera C. Recording Playback Snapshot Mode Selection 26 ENBasic Shooting Snapshot Snapshot RecordingWhen unwanted still images are stored in the memory When you do not want to hear the shutter sound, setEN27 To Delete Unwanted Still ImagesPower Switch to 28 ENAuto Playback Index Screen Index PlaybackEN29 30 EN Jump PlaybackProtecting Images EN31To Protect AN Image To Remove Protection32 EN Deleting ImagesTo Delete the Displayed Image To Select AN Image by BrowsingEN33 To Delete ALL ImagesBefore doing the following, perform steps 1 through 3 on pg To Reset The Setting 34 ENTo Print ALL Still Images ONE Print for Each To Reset The No. Of Prints EN35To Print by Selecting Still Images and NO. of Prints 36 EN Initializing a Memory CardYou can initialize a memory card anytime Advanced Features For Recording38 EN For RecordingNight-Alive Program AE With Special EffectsEN39 Gives recorded scenes a strobe effectYour recording looks like a series of consecutive snapshots Slow Slow Shutter40 EN Fade/Wipe EffectsFADE/WIPE Selection Picture Wipe or Dissolve SelectionEN41 Fader And Wipe MenuMenu Effect 42 EN Snapshot For Video RecordingFeature Auto Focus Feature Manual FocusEN43 To obtain correct focus44 EN Exposure ControlIris Lock White Balance Adjustment Manual White Balance OperationEN45 To Return To Automatic White BalanceEN Using Menus for Detailed Adjustment For Recording MenuIf you have selected WIPE/FADER Program AE or W. Balance See pgEN47 Menu Screen ExplanationsAppears. When using this Normal screen ratioScreen ratio becomes Recording. Also to activate the shutter sound effect  pgEN49 Following procedure applies to all except Synchro Comp  pg For Playback MenuDisplay EN51Playback Sound 52 EN DubbingDubbing To Or From a VCR To use this camcorder as a playerEN53 54 EN To a Tape GR-DVL915/DVL815/DVL510 onlyDubbing Images Recorded On a Tape To a Images can be dubbed from a tape to a memory cardInstalling The Batteries RM-V716U or RM-V715U, provided Installing The Battery RM-V700U, optional56 EN EN57 753158 EN 45362Feature Slow-Motion Playback Feature Frame-By-Frame PlaybackFeature Playback Special Effects GR-DVL915/DVL815 only EN59Feature Playback Zoom 60 ENPress Play 4 to find the scene of interest PlayEN61 SET REMOTE/VCR CodeVCR Recording deck For GR-DVL510/DVL310 Owners Use the optionalJVC VCR equipped with a remote pause connector 62 ENMake Connections VCR other than aboveEN63 Select ScenesRandom Assemble Editing Menu appears For GR-DVL915/DVL815 Owners64 EN Automatic Editing to VCRAdjustment of VCR/CAMCORDER Timing For More Accurate EditingEN65 Diagnosing VCR/CAMCORDER TimingSet 12BIT Mode to Sound 2 or MIX Menu Screen  pg 66 ENAudio Dubbing To hear the dubbed sound during playbackEN67 Insert Editing GR-DVL915/DVL815/DVL510 onlyUsing USB or PC connection cable Using DV cableUsing DV cable AUsing USB or PC connection cableConnection To a Video Unit Equipped With a DV Connector EN6970 EN ReferencesPower DetailsEN71  pg72 EN Corrective ActionEN73 Troubleshooting 74 ENEN75 76 EN User Maintenance After Use Cleaning The CamcorderTurn off the camcorder Press Push Here to close the cassette holder78 EN 5 6EN79 Appears when the VIDEO/DSC Switch is set to 80 EN pg Appears and blinks during shooting.  pg Standard in order of qualityEN81 LCD Monitor/Viewfinder Indications During Video Playback EN83 Indications FunctionSwitch is set to  pgPossible To DSC  pgEN85 USA86 EN Store cassettesEN87 88 EN TermsEN89 Time Code  pg , 49, 5090 EN For GeneralFor Digital Video Camera For Connectors EN91For Digital Still Camera GR-DVL915/DVL815/DVL510 only GR-DVL310
Related manuals
Manual 92 pages 40.43 Kb

GR-DVL815 specifications

The JVC GR-DVL815 is a compact and portable digital camcorder that made its mark in the early 2000s, combining functionality with user-friendly features. Designed for both amateur and semi-professional videographers, this camcorder offers a versatile solution for capturing high-quality video content.

One of the standout features of the JVC GR-DVL815 is its 1/4-inch CCD sensor, which allows for vibrant image quality and enhanced performance in various lighting conditions. With a resolution of 800,000 pixels, it captures crisp, clear images that are suitable for home videos and more serious projects alike. Additionally, the camcorder supports Digital Video (DV) format, providing excellent video clarity and minimizing artifacts during compression.

The GR-DVL815 offers a 10x optical zoom and a 700x digital zoom, giving users the ability to capture distant subjects with remarkable detail. The zoom mechanism is smooth and responsive, allowing for seamless transitions and dynamic shots. The camcorder is equipped with a 2.5-inch LCD screen, which provides a clear view of the shot being captured, making it easier to frame scenes and navigate menus.

In terms of connectivity, the JVC GR-DVL815 features a FireWire (IEEE 1394) port for easy transfer of video content to a computer for editing. This connectivity option was particularly valuable during its time, as it allowed for quick and efficient imports, eliminating the need for extra conversion steps. Moreover, the camcorder includes an A/V output, enabling easy connection to TVs and other video equipment, facilitating playback directly from the device.

The GR-DVL815 also boasts a range of recording formats, including SP (Standard Play) and LP (Long Play), allowing users to choose between video quality and recording time. The camcorder supports MiniDV tapes, another feature that was popular due to the compact size of the media and the high-quality recording it allowed.

Battery life is another essential aspect, and the GR-DVL815 delivers with a reliable power management system that provides ample recording time on a full charge. The lightweight and ergonomic design of the camcorder ensures comfort during extended shooting sessions.

Overall, the JVC GR-DVL815 is a well-rounded camcorder that combines essential features, solid performance, and ease of use, making it a popular choice for those looking to document significant moments of their lives or engage in creative video projects. Its blend of optical zoom capabilities, digital connectivity, and intuitive design solidified its place in the hearts of early 2000s videographers and hobbyists.
Top Page Image Contents