JVC GR-DVL815 specifications EN53

Page 53

VIDEO/DSC Switch (GR-DVL915/DVL815/DVL510 only)

To DV

IN/OUT

Core filter

Lock Button

 

 

 

OFF

 

 

 

 

 

 

 

Y

 

 

A

 

 

P

L

 

 

DV cable

 

 

 

 

(optional)

Power Switch

 

Core filter

To DV

IN/OUT

Video unit equipped with DV connector

PLAY (4)

STOP (5)

EN53

Dubbing To Or From A Video Unit Equipped With A DV Connector (Digital Dubbing)

It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. Since a digital signal is sent, there is little if any image or sound deterioration.

[To use this camcorder as a player]

1 Make sure all units are turned off. Connect the camcorder to a video unit equipped with a DV input connector using a DV cable as shown in the illustration.

2 Set the VIDEO/DSC Switch to “VIDEO” (GR- DVL915/DVL815/DVL510 only), set the camcorder’s

Power Switch to “ ” while pressing down the Lock Button located on the switch, turn on the video unit’s power, and insert the appropriate cassettes in the camcorder and the video unit.

3 Press 4to play back the source tape.

4 While watching the playback on the monitor, engage the DV connector-equipped video unit’s record mode from the spot on the source tape you want to begin recording.

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack ( pg. 9).

●If the remote control is used when both the player and recorder are JVC video units, both units will perform the same operation. To prevent this from happening, press the buttons on both units.

●If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so that an unusual image is not dubbed.

●Even though the DV cable is connected correctly, some- times the image may not appear in step 4. If this occurs, turn off the power and make connections again.

●If “Playback Zoom” (  pg. 60), “Playback Special Effects” (GR-DVL915/DVL815 only,  pg. 59) or “Snapshot” is attempted during playback, only the original playback image recorded on the tape is output from the DV IN/OUT connector.

●When using a DV cable, be sure to use the optional JVC VC-VDV204U DV cable.

To Use This Camcorder As A Recorder . . .

1.Set the VIDEO/DSC Switch to “VIDEO” (GR-DVL915/DVL815/DVL510 only), then turn the Power

Switch to “ ” while pressing down the Lock Button located on the switch.

2.Set “REC MODE” to “SP” or “LP” in the Menu Screen ( pg. 50)

3.Connect the DV cable as shown in the illustration and load a cassette to record on.

4.Press the Recording Start/Stop button to engage the Record-Pause mode. “ DV. IN ” appears on the screen.

5.Press the Recording Start/Stop button to start recording. rotates.

6.Press the Recording Start/Stop button again to engage the Record-Pause mode. stops rotating.

NOTES:

●Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current “SOUND MODE” setting (  pg. 47).

●During Digital Dubbing, no signals are output from the video or audio connectors.

Page 52 Page 54
Image 53
Page 52 Page 54
Contents GR-DVL915 GR-DVL815 GR-DVL510 GR-DVL310 It is recommended that you Dear CustomerImportant Safety Instructions Memory cards can be used with GR-DVL915/DVL815/DVL510 only Make sure you only use cassettes with the Mini DV markAttachment AAA R03 Battery x Remote Control Unit RM-V716U GR-DVL915AC Adapter MultiMediaCard MB GR-DVL915/ DVL815 only orAutomatic Demonstration How To Attach The Lens CapGetting Started ContentsCharging the Battery Pack PowerTo Detach The Battery Pack Slide BAT. Release and pull out the battery packUsing AC Power Using the Battery PackAbout Batteries Selection in the AC range from 110 V to 240Viewfinder Adjustment Grip Adjustment10 EN Shoulder Strap AttachmentEN11 Date/Time SettingsApproximate recording time 12 ENLoading/Unloading a Cassette EN13 Recording Mode SettingSet the tape recording mode depending on your preference Loading a Memory Card Picture Quality Mode SettingGR-DVL915/DVL815/DVL510 only To Unload a Memory CardVideo Recording & Playback Contents16 EN To Adjust The Brightness Of The DisplayVideo Recording Basic RecordingEN17 Operation ModeJournalistic Shooting SELF-RECORDING18 EN Slide the Power Zoom Lever towards TZoom Zoom OutTo brighten the scene when natural lighting is too dim Feature Video LightEN19 Set Light OFF/AUTO/ON as required20 EN When a blank portion is recorded on a tapeTime Code Proper recordingVideo Playback To Control The Speaker VolumeNormal Playback EN2122 EN Set on Screen to LCD or LCD/TV in the Menu Screen  pg If using a VCR . . . go to step If not . . . go to stepEN23 24 EN To cancel Blank Search midwayBlank Search Press Blank SearchDigital Still Camera C. Recording Playback 26 EN Snapshot Mode SelectionBasic Shooting Snapshot Snapshot RecordingWhen you do not want to hear the shutter sound, set When unwanted still images are stored in the memoryEN27 To Delete Unwanted Still ImagesAuto Playback Power Switch to28 EN EN29 Index ScreenIndex Playback Jump Playback 30 ENEN31 Protecting ImagesTo Protect AN Image To Remove ProtectionDeleting Images 32 ENTo Delete the Displayed Image To Select AN Image by BrowsingBefore doing the following, perform steps 1 through 3 on pg EN33To Delete ALL Images To Print ALL Still Images ONE Print for Each To Reset The Setting34 EN To Print by Selecting Still Images and NO. of Prints To Reset The No. Of PrintsEN35 You can initialize a memory card anytime 36 ENInitializing a Memory Card For Recording Advanced FeaturesFor Recording 38 ENNight-Alive Program AE With Special EffectsGives recorded scenes a strobe effect EN39Your recording looks like a series of consecutive snapshots Slow Slow ShutterFade/Wipe Effects 40 ENFADE/WIPE Selection Picture Wipe or Dissolve SelectionMenu Effect EN41Fader And Wipe Menu Snapshot For Video Recording 42 ENFeature Manual Focus Feature Auto FocusEN43 To obtain correct focusIris Lock 44 ENExposure Control Manual White Balance Operation White Balance AdjustmentEN45 To Return To Automatic White BalanceFor Recording Menu EN Using Menus for Detailed AdjustmentIf you have selected WIPE/FADER Program AE or W. Balance See pgMenu Screen Explanations EN47Normal screen ratio Appears. When using thisScreen ratio becomes Recording. Also to activate the shutter sound effect  pgEN49 For Playback Menu Following procedure applies to all except Synchro Comp  pgPlayback Sound DisplayEN51 Dubbing 52 ENDubbing To Or From a VCR To use this camcorder as a playerEN53 To a Tape GR-DVL915/DVL815/DVL510 only 54 ENImages can be dubbed from a tape to a memory card Dubbing Images Recorded On a Tape To a56 EN Installing The Batteries RM-V716U or RM-V715U, providedInstalling The Battery RM-V700U, optional 7531 EN5745362 58 ENFeature Frame-By-Frame Playback Feature Slow-Motion PlaybackFeature Playback Special Effects GR-DVL915/DVL815 only EN5960 EN Feature Playback ZoomPress Play 4 to find the scene of interest PlaySET REMOTE/VCR Code EN61VCR Recording deck For GR-DVL510/DVL310 Owners Use the optional62 EN JVC VCR equipped with a remote pause connectorMake Connections VCR other than aboveSelect Scenes EN63Random Assemble Editing Menu appears For GR-DVL915/DVL815 OwnersAutomatic Editing to VCR 64 ENFor More Accurate Editing Adjustment of VCR/CAMCORDER TimingEN65 Diagnosing VCR/CAMCORDER Timing66 EN Set 12BIT Mode to Sound 2 or MIX Menu Screen  pgAudio Dubbing To hear the dubbed sound during playbackInsert Editing GR-DVL915/DVL815/DVL510 only EN67Using DV cable Using USB or PC connection cableUsing DV cable AUsing USB or PC connection cableEN69 Connection To a Video Unit Equipped With a DV ConnectorReferences 70 ENDetails PowerEN71  pgCorrective Action 72 ENEN73 74 EN TroubleshootingEN75 76 EN After Use Cleaning The Camcorder User MaintenanceTurn off the camcorder Press Push Here to close the cassette holder5 6 78 ENEN79 80 EN Appears when the VIDEO/DSC Switch is set to pg Appears and blinks during shooting.  pg Standard in order of qualityEN81 LCD Monitor/Viewfinder Indications During Video Playback Indications Function EN83 pg Switch is set toPossible To DSC  pgUSA EN85Store cassettes 86 ENEN87 Terms 88 ENTime Code  pg , 49, 50 EN89For Digital Video Camera 90 ENFor General For Digital Still Camera GR-DVL915/DVL815/DVL510 only For ConnectorsEN91 GR-DVL310
Related manuals
Manual 92 pages 40.43 Kb

GR-DVL815 specifications

The JVC GR-DVL815 is a compact and portable digital camcorder that made its mark in the early 2000s, combining functionality with user-friendly features. Designed for both amateur and semi-professional videographers, this camcorder offers a versatile solution for capturing high-quality video content.

One of the standout features of the JVC GR-DVL815 is its 1/4-inch CCD sensor, which allows for vibrant image quality and enhanced performance in various lighting conditions. With a resolution of 800,000 pixels, it captures crisp, clear images that are suitable for home videos and more serious projects alike. Additionally, the camcorder supports Digital Video (DV) format, providing excellent video clarity and minimizing artifacts during compression.

The GR-DVL815 offers a 10x optical zoom and a 700x digital zoom, giving users the ability to capture distant subjects with remarkable detail. The zoom mechanism is smooth and responsive, allowing for seamless transitions and dynamic shots. The camcorder is equipped with a 2.5-inch LCD screen, which provides a clear view of the shot being captured, making it easier to frame scenes and navigate menus.

In terms of connectivity, the JVC GR-DVL815 features a FireWire (IEEE 1394) port for easy transfer of video content to a computer for editing. This connectivity option was particularly valuable during its time, as it allowed for quick and efficient imports, eliminating the need for extra conversion steps. Moreover, the camcorder includes an A/V output, enabling easy connection to TVs and other video equipment, facilitating playback directly from the device.

The GR-DVL815 also boasts a range of recording formats, including SP (Standard Play) and LP (Long Play), allowing users to choose between video quality and recording time. The camcorder supports MiniDV tapes, another feature that was popular due to the compact size of the media and the high-quality recording it allowed.

Battery life is another essential aspect, and the GR-DVL815 delivers with a reliable power management system that provides ample recording time on a full charge. The lightweight and ergonomic design of the camcorder ensures comfort during extended shooting sessions.

Overall, the JVC GR-DVL815 is a well-rounded camcorder that combines essential features, solid performance, and ease of use, making it a popular choice for those looking to document significant moments of their lives or engage in creative video projects. Its blend of optical zoom capabilities, digital connectivity, and intuitive design solidified its place in the hearts of early 2000s videographers and hobbyists.
Top Page Image Contents