JVC GR-DVL815 20 EN, Time Code, When a blank portion is recorded on a tape, Proper recording

Page 20

20 EN

VIDEO RECORDING (cont.)

Time Code

During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback.

If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame). If recording starts from the end of a previously recorded scene, the time code continues from the last time code number.

To perform Random Assemble Editing ( pg. 61 – 65), time code is necessary. If during recording a blank portion is left partway through the tape, the time code is interrupted. When recording is resumed, the time code starts counting up again from “00:00:00”. This means the camcorder may record the same time codes as those existing in a previously recorded scene. To prevent this, perform “Recording From The Middle of A Tape” below in the following cases;

•When shooting again after playing back a recorded tape.

•When power shuts off during shooting.

•When a tape is removed and re-inserted during shooting.

•When shooting using a partially recorded tape.

•When shooting on a blank portion located partway through the tape.

•When shooting again after shooting a scene then opening/closing the cassette holder cover.

Display

 

 

 

 

 

 

 

Frames are not displayed

 

 

 

 

 

 

 

during recording.

 

 

 

 

 

 

 

 

 

Minutes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Seconds

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Frames

 

 

 

 

 

 

 

 

 

1

 

2 : 3

 

4 : 2

 

4

 

 

(30 frames = 1 second)

 

 

 

 

 

Recording From The Middle Of A Tape

1.Play back a tape or use Blank Search ( pg. 24) to find the spot at which you want to start recording, then engage the Still Playback mode ( pg. 21).

2.Set the Power Switch to “ ” or “ ” while pressing down the Lock Button located on the switch, then start recording.

NOTES:

●The time code cannot be reset.

●During fast-forwarding and rewinding, the time code indication does not move smoothly.

●The time code is displayed only when “TIME CODE” is set to “ON” ( pg. 49, 50).

When a blank portion is recorded on a tape

Time code

Time code

Time code

00:00:00

05:43:21

00:00:00

Tape

Already recorded scene

Blank

Newly recorded scene

Shooting start pointShooting stop point Shooting start point

Proper recording

Time code

Time code

Time code

00:00:00

05:43:21

05:44:00

Tape

Already recorded scene

New scene

Latest scene

Shooting start point

Shooting start point

Shooting start point

Page 19 Page 21
Image 20
Page 19 Page 21
Contents GR-DVL915 GR-DVL815 GR-DVL510 GR-DVL310 Dear Customer It is recommended that youImportant Safety Instructions Make sure you only use cassettes with the Mini DV mark Memory cards can be used with GR-DVL915/DVL815/DVL510 onlyRemote Control Unit RM-V716U GR-DVL915 Attachment AAA R03 Battery xAC Adapter MultiMediaCard MB GR-DVL915/ DVL815 only orHow To Attach The Lens Cap Automatic DemonstrationContents Getting StartedPower Charging the Battery PackTo Detach The Battery Pack Slide BAT. Release and pull out the battery packUsing the Battery Pack Using AC PowerAbout Batteries Selection in the AC range from 110 V to 240Grip Adjustment Viewfinder Adjustment10 EN Shoulder Strap AttachmentDate/Time Settings EN11Approximate recording time 12 ENLoading/Unloading a Cassette EN13 Recording Mode SettingSet the tape recording mode depending on your preference Picture Quality Mode Setting Loading a Memory CardGR-DVL915/DVL815/DVL510 only To Unload a Memory CardContents Video Recording & PlaybackTo Adjust The Brightness Of The Display 16 ENVideo Recording Basic RecordingOperation Mode EN17Journalistic Shooting SELF-RECORDINGSlide the Power Zoom Lever towards T 18 ENZoom Zoom OutFeature Video Light To brighten the scene when natural lighting is too dimEN19 Set Light OFF/AUTO/ON as requiredWhen a blank portion is recorded on a tape 20 ENTime Code Proper recordingTo Control The Speaker Volume Video PlaybackNormal Playback EN2122 EN Set on Screen to LCD or LCD/TV in the Menu Screen  pg If using a VCR . . . go to step If not . . . go to stepEN23 To cancel Blank Search midway 24 ENBlank Search Press Blank SearchDigital Still Camera C. Recording Playback Snapshot Mode Selection 26 ENBasic Shooting Snapshot Snapshot RecordingWhen unwanted still images are stored in the memory When you do not want to hear the shutter sound, setEN27 To Delete Unwanted Still ImagesAuto Playback Power Switch to28 EN EN29 Index ScreenIndex Playback 30 EN Jump PlaybackProtecting Images EN31To Protect AN Image To Remove Protection32 EN Deleting ImagesTo Delete the Displayed Image To Select AN Image by BrowsingBefore doing the following, perform steps 1 through 3 on pg EN33To Delete ALL Images To Print ALL Still Images ONE Print for Each To Reset The Setting34 EN To Print by Selecting Still Images and NO. of Prints To Reset The No. Of PrintsEN35 You can initialize a memory card anytime 36 ENInitializing a Memory Card Advanced Features For Recording38 EN For RecordingNight-Alive Program AE With Special EffectsEN39 Gives recorded scenes a strobe effectYour recording looks like a series of consecutive snapshots Slow Slow Shutter40 EN Fade/Wipe EffectsFADE/WIPE Selection Picture Wipe or Dissolve SelectionMenu Effect EN41Fader And Wipe Menu 42 EN Snapshot For Video RecordingFeature Auto Focus Feature Manual FocusEN43 To obtain correct focusIris Lock 44 ENExposure Control White Balance Adjustment Manual White Balance OperationEN45 To Return To Automatic White BalanceEN Using Menus for Detailed Adjustment For Recording MenuIf you have selected WIPE/FADER Program AE or W. Balance See pgEN47 Menu Screen ExplanationsAppears. When using this Normal screen ratioScreen ratio becomes Recording. Also to activate the shutter sound effect  pgEN49 Following procedure applies to all except Synchro Comp  pg For Playback MenuPlayback Sound DisplayEN51 52 EN DubbingDubbing To Or From a VCR To use this camcorder as a playerEN53 54 EN To a Tape GR-DVL915/DVL815/DVL510 onlyDubbing Images Recorded On a Tape To a Images can be dubbed from a tape to a memory card56 EN Installing The Batteries RM-V716U or RM-V715U, providedInstalling The Battery RM-V700U, optional EN57 753158 EN 45362Feature Slow-Motion Playback Feature Frame-By-Frame PlaybackFeature Playback Special Effects GR-DVL915/DVL815 only EN59Feature Playback Zoom 60 ENPress Play 4 to find the scene of interest PlayEN61 SET REMOTE/VCR CodeVCR Recording deck For GR-DVL510/DVL310 Owners Use the optionalJVC VCR equipped with a remote pause connector 62 ENMake Connections VCR other than aboveEN63 Select ScenesRandom Assemble Editing Menu appears For GR-DVL915/DVL815 Owners64 EN Automatic Editing to VCRAdjustment of VCR/CAMCORDER Timing For More Accurate EditingEN65 Diagnosing VCR/CAMCORDER TimingSet 12BIT Mode to Sound 2 or MIX Menu Screen  pg 66 ENAudio Dubbing To hear the dubbed sound during playbackEN67 Insert Editing GR-DVL915/DVL815/DVL510 onlyUsing USB or PC connection cable Using DV cableUsing DV cable AUsing USB or PC connection cableConnection To a Video Unit Equipped With a DV Connector EN6970 EN ReferencesPower DetailsEN71  pg72 EN Corrective ActionEN73 Troubleshooting 74 ENEN75 76 EN User Maintenance After Use Cleaning The CamcorderTurn off the camcorder Press Push Here to close the cassette holder78 EN 5 6EN79 Appears when the VIDEO/DSC Switch is set to 80 EN pg Appears and blinks during shooting.  pg Standard in order of qualityEN81 LCD Monitor/Viewfinder Indications During Video Playback EN83 Indications FunctionSwitch is set to  pgPossible To DSC  pgEN85 USA86 EN Store cassettesEN87 88 EN TermsEN89 Time Code  pg , 49, 50For Digital Video Camera 90 ENFor General For Digital Still Camera GR-DVL915/DVL815/DVL510 only For ConnectorsEN91 GR-DVL310
Related manuals
Manual 92 pages 40.43 Kb

GR-DVL815 specifications

The JVC GR-DVL815 is a compact and portable digital camcorder that made its mark in the early 2000s, combining functionality with user-friendly features. Designed for both amateur and semi-professional videographers, this camcorder offers a versatile solution for capturing high-quality video content.

One of the standout features of the JVC GR-DVL815 is its 1/4-inch CCD sensor, which allows for vibrant image quality and enhanced performance in various lighting conditions. With a resolution of 800,000 pixels, it captures crisp, clear images that are suitable for home videos and more serious projects alike. Additionally, the camcorder supports Digital Video (DV) format, providing excellent video clarity and minimizing artifacts during compression.

The GR-DVL815 offers a 10x optical zoom and a 700x digital zoom, giving users the ability to capture distant subjects with remarkable detail. The zoom mechanism is smooth and responsive, allowing for seamless transitions and dynamic shots. The camcorder is equipped with a 2.5-inch LCD screen, which provides a clear view of the shot being captured, making it easier to frame scenes and navigate menus.

In terms of connectivity, the JVC GR-DVL815 features a FireWire (IEEE 1394) port for easy transfer of video content to a computer for editing. This connectivity option was particularly valuable during its time, as it allowed for quick and efficient imports, eliminating the need for extra conversion steps. Moreover, the camcorder includes an A/V output, enabling easy connection to TVs and other video equipment, facilitating playback directly from the device.

The GR-DVL815 also boasts a range of recording formats, including SP (Standard Play) and LP (Long Play), allowing users to choose between video quality and recording time. The camcorder supports MiniDV tapes, another feature that was popular due to the compact size of the media and the high-quality recording it allowed.

Battery life is another essential aspect, and the GR-DVL815 delivers with a reliable power management system that provides ample recording time on a full charge. The lightweight and ergonomic design of the camcorder ensures comfort during extended shooting sessions.

Overall, the JVC GR-DVL815 is a well-rounded camcorder that combines essential features, solid performance, and ease of use, making it a popular choice for those looking to document significant moments of their lives or engage in creative video projects. Its blend of optical zoom capabilities, digital connectivity, and intuitive design solidified its place in the hearts of early 2000s videographers and hobbyists.
Top Page Image Contents