JVC GR-DVL9000 manual Tape END appears, Don’t work

Page 70

70EN

TROUBLESHOOTING

If, after following the steps in the chart below, the problem still exists, please consult your nearest JVC dealer.

SYMPTOM

POSSIBLE CAUSES

1.No power is supplied. 1. •The power is not connected properly.

•The battery is dead. •The LCD monitor is not

open fully or the viewfinder is not pulled out when recording.

2.“SET DATE/TIME!” 2. •The built-in rechargeable

appears.

clock lithum battery is

 

discharged and the

 

previously set date/time is

 

erased.

3. Recording cannot be

3. •The tape’s record safety tab

performed.

is set to “SAVE”.

 

•The Power Dial is set to

 

“PLAY”.

 

•“TAPE END” appears.

 

•The cassette's cover is open.

4. There is no playback

4. •The camcorder is not getting

picture.

power, or some other

 

malfunction exists.

5. Some functions are not

5. •The Power Dial is set to

available using the MENU

“

A

”.

 

 

 

button.

 

 

 

6. Some functions are not

6. •The Power Dial is set to

available using the Select

“

A

”, “5S” and “ ”.

 

 

 

Dial.

7.The focus does not adjust 7. •Focus is set to “MANUAL”.

automatically.•The recording was done in a dark place, or the contrast was low.

•The lens is dirty or covered with condensation.

8.The cassette won’t load 8. •The cassette is in the wrong

properly.

position.

 

•The battery’s charge is low.

9. Play, Rewind and

9. •The Power Dial is not set to

Fast-Forward functions

“PLAY”.

don’t work.

 

 

 

CORRECTIVE ACTION

1.• Connect the AC Adapter securely (☞ pg. 10).

•Replace the dead battery with a fully charged one (☞ pg. 9).

•Open the LCD monitor fully or pull out the viewfinder. The LCD monitor turns on/off when it is opened/closed at approx. 90° while the Power Dial is set to any position except “OFF” if the viewfinder is not fully pulled out.

2.• Connect the camcorder to an AC outlet using the AC Power Adapter/Charger etc. for over 24 hours to charge the clock lithum battery (☞ pg. 11).

3.• Set the tape’s record safety tab to “REC” (☞ pg. 12).

•Set the Power Dial to “ A ”, “ M ”, “5S” or “ ”

(☞ pg. 17).

•Replace with new cassette (☞ pg. 12).

•Close the cassette's cover.

4.• Turn the camcorder’s power off and on again (☞ pg. 19).

5.• Set the Power Dial to any position except “ A ” (☞ pg. 17).

6.• Set the Power Dial to any position except “ A ”, “5S” and “” (☞ pg. 17).

7.• Set Focus to “AUTO”

(☞ pg. 45).

•Clean the lens and check the focus again (☞ pg. 75).

8.• Set it in the right position

(☞ pg. 12).

•Install a fully charged battery (☞ pg. 8).

9.• Set the Power Dial to “PLAY” (☞ pg. 50).

Page 69 Page 71
Image 70
Page 69 Page 71
Contents GR-DVL9000 Dear Customer It is recommended that youSafety Precautions DV markVIDEO/AUDIO cable RM-V711UDVM-30 M-DV30ME Mini-plug 4RCA plugCD-ROM Video Area Audio Area Sub-Code AreaITI Insert and Tracking Information Area Contents Charging The Battery Pack Insert Charged Battery Installing The Battery PackOpen Battery Cover Close Battery CoverIndoor Use Using The Power PackAC Power Attach to CamcorderInput Date and Time Date/Time SettingsSelect Operation Mode LCD monitorOpen Cassette Cover Loading/Unloading a CassetteOpen LCD Monitor INSERT/REMOVE TapeSet depending on your preference Recording Mode SettingSET Recording Mode Select DialTripod Mounting Adjust LengthGrip Strap Attachment Bottom of the camcorderShoulder Strap Attachment Dioptre AdjustmentAdjust Dioptre Attach Shoulder StrapRE-INSERT Holder Remote Control UnitInstalling The Battery FADE/WIPE Button pgPower Dial Position Operation ModeFunction EN Recording DisplayStop Recording Pull OUT Viewfinder or Open LCD MonitorStart Recording END RecordingRecording From The Middle Of a Tape Engage Still ModePower lamp comes on Start SearchProper recording When blank portion is recorded on a tapeTime Code During shootingBrightness Control Tape Remaining IndicatorAdjust Brightness Select Dial ON/OFF buttonInterface Shooting Journalistic shootingTilt LCD Monitor Zoom Displaying The Date And Time During Recording Select FunctionTo Take a Snapshot In The 5-Second Mode Engage 5S ModeDissolves during 5 second mode recording Scene 5-second recordingStop SELF-TIMER Recording Self-TimerEngage SELF-TIMER Mode END SELF-TIMER RecordingTake PRO Snapshot Pro SnapshotPress the Progressive Button Snapshot Button Progressive Mode Motor Drive modeWhen you dont want to hear the shutter sound Description of Progressive Scan CCD FrameRecording Menu allows you to set these functions MenusClose Recording Menu Please refer to pages 32, 33 for detailsREC Mode Recording mode Wide ModeZoom Zoom magnification DIS Digital Image StabilizerSystem Menu Access System MenuClose System Menu Sound signals can be sampled at 32 kHz or 48 kHz ReturnTo Cancel FADE/WIPE Effects Accessmenu Manual Mode ItemAccess FADER/WIPE Menu FADE/WIPE EffectsFader White Fades and WipesExample Example Wipe ScrollResume Recording Picture Wipe/DissolveP and P of the Fader/Wipe Menu Random Variations WH BK B WFade out from colour to black and white Fade in or out with a white screenFade in or out with a black screen ScreenNew scene wipes in over the previous one from the upper New scene gradually appears as the old one graduallyDisappears Right corner to the lower left cornerAE/Effects Disable P.AE/EFFECTSelected mode appears Press START/STOP. The image begins with the selected effectTwilight Classic FilmStrobe SepiaProgressive Video Recording Adjust Focus Manual Focus AdjustmentAccess Manual Focus To Change To Auto FocusBrightness control of the LCD monitor Adjust ExposureExposure Control To Return To Automatic Exposure ControlTo Return To Automatic Iris Control After , adjust the exposure rotatingIris Lock IrisClosement White Balance Adjust White Balance AdjustmentAccessment White Balance Adjust Select Auto in . Or set the Power Dial toManual White Balance Operation Enter SettingExit Manual White Balance Adjustment To Change The Tint For RecordingViewing Recording Volume switchRewind Tape END PlaybackPress 2 or 3 after pressing 6/4. The tape To Perform High-Speed SearchHigh-Speed Search. This is not a malfunction Locatescene Portion of Magnified Playback ZoomActivate Zoom END ZoomSelect P.AE/EFFECT Playback EffectsRM-V711U Provided Close Menu Access Playback MenuPlayback Menu Playback Menu allows you to set the following functionsDisplaying the Date During Playback Playback SoundDisplaying The Time Code During Playback EN Playback Basic Connections VCR/TV ConnectionTurn on Power Select TV’S Video ModeSupply Power Connection To a Personal ComputerAC Power Adapter Charger Connection To a Video Unit Equipped With a DV ConnectorTo DV in connector Digital PrinterStart Playback DubbingMake Connections Pause RecordingDigital Dubbing Operate the VCR VCR Code List Brand SettingRM-V711U 7 8 9 ` provided Random Assemble Editing Execute FADE/WIPE in if NecessarySET EDIT-OUT Point SET EDIT-IN PointUSE P.AE/EFFECT if Necessary Start Editing Engagemode Vcrs RECORD-PAUSEStop Editing Choose a Scene For More Accurate EditingPrepare for R.A. Edit Play Back Dubbed Scene Random Assemble Editing Menu appearsAdjustment of VCR‘s against Camcorder Timing Input Correction DataBegin Dubbing Audio DubbingFind EDIT-IN Point Pause During DubbingFind Edit in Point Insert EditingFind Edit OUT Point Pause During EditingTape END appears Don’t workDuring Digital Zoom For editing was registeredMode is set to OFF Red or black for an instantThere are disturbances in audio and video LCD monitor. When This happens, the displayedWhen the LCD monitors Fluorescent light reaches Angle of the LCD monitorIf the indication remains Same timeLCD monitor or Camcorder’s functions Even though you repeatCleaning The Camcorder Connector cover Pull this out to openOPEN/EJECT switch pg External microphone input connector MIC Stereo pgReset button pg Power dial pgBattery cover pg Cassette cover pg DV OUT connector pg , 59OUT S2 OUT connector pg Battery cover open switch Battery pgLCD Monitor/Viewfinder Indications During Recording FunctionLCD Monitor/Viewfinder Indications During Playback Indications Function To avoid hazard For safety, do notAvoid using the unit During useTo protect the unit, do not To prolong service lifeDo not leave the unit To prevent damage to the LCD monitor, do notSignal format PowerPower consumption Video signal recording formatAuto focus Colour temperatureAC Adapter On-screen displayPg 35 Motor Drive Mode .................................. pgAnimation Audio Dubbing Connections Pg , 56 59Memoen GR-DVL9000
Related manuals
Manual 92 pages 53.07 Kb

GR-DVL9000 specifications

The JVC GR-DVL9000 is a standout product in the realm of digital camcorders, showcasing a blend of advanced technology and user-friendly features. Released as part of JVC's line of DV camcorders, it quickly gained popularity among consumers seeking high-quality video recording without compromising on style and functionality.

At the heart of the GR-DVL9000 is its impressive 1/4-inch CCD sensor, which delivers a resolution of 800,000 pixels. This sensor ensures that the camcorder captures vibrant colors and sharp details, allowing users to record their precious moments in stunning clarity. Its capability to offer a 16:9 aspect ratio enhances the cinematic experience, making it particularly appealing for filmmakers and enthusiasts looking to achieve a more professional look in their videos.

The GR-DVL9000 employs JVC's advanced DV format, which offers superior video quality compared to traditional analog formats. This digital advantage is further amplified with the incorporation of 3D Digital Noise Reduction technology, ensuring clean and smooth playback, even in low-light conditions. The camcorder also supports a range of recording modes, allowing flexibility for various shooting environments, whether indoors or outdoors.

One of the key characteristics of the GR-DVL9000 is its user-centric design. The camcorder features an easy-to-navigate menu system and an ergonomic grip that enhances comfort during prolonged use. The large 3.5-inch LCD screen provides real-time feedback, making it easy to frame shots accurately and review recordings without straining the eyes.

Additionally, the GR-DVL9000 includes a 20x optical zoom lens, enabling users to get close to the action without sacrificing image quality. This is particularly useful for nature documentaries, sports events, or any scenario where capturing distant subjects is vital.

Connectivity options are also a highlight of this device. The camcorder includes both FireWire (IEEE 1394) and USB ports, allowing for seamless transfer of videos to computers for editing and archiving. This ease of connectivity underscores the GR-DVL9000’s suitability for both casual users and those who take their videography seriously.

In conclusion, the JVC GR-DVL9000 stands out with its combination of a strong CCD sensor, advanced digital recording capabilities, user-friendly design, and robust connectivity options. Whether for personal use or professional projects, it remains a compelling choice among digital camcorders, epitomizing JVC's commitment to quality and innovation in videography.
Top Page Image Contents