JVC GR-DVL9000 manual Installing The Battery Pack, Open Battery Cover, Insert Charged Battery

Page 9

EN9

Charging Environment

Perform charging where the temperature is between 10° and 30°C. (20° to 25°C is the ideal temperature range for charging.) If the environment is too cold, charging may be incomplete.

Continuous Shooting

Continuous shooting is possible (See table below for recording time) under the following conditions:

•A BN-V814U Battery Pack is in use

•The temperature is approximately 20°C

However, . . .

•If the temperature is below 10°C, or

•If zoom or Record-Standby are engaged or LCD monitor is used repeatedly, continuous shooting capability is reduced significantly. Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.

Approximate recording time (unit: min)

No. of batteries to supply power	LCD monitor off/	LCD monitor on/
	Viewfinder on	Viewfinder off

Using one battery installed in the camcorder	100	80

Using two batteries; one in the camcorder and
one in the Power Pack (optional) attached to the	180	140
camcorder

Installing The Battery Pack

The battery pack does not charge while in the camcorder. Before installation, make sure the battery pack has been charged fully.

Battery cover

Battery

Hook

Open switch (BATTERY)

1

2

OPEN BATTERY COVER

Slide the open switch.

INSERT CHARGED BATTERY

Insert the mark end of the battery first until you hear a click. The hook rises. Inserting the battery backwards will result in malfunction.

NOTES:

●To remove the battery, turn off the camcorder, open the battery cover and push down the hook.

●Be careful not to drop the battery pack.

●The hook is tight to prevent the battery from dropping.

3 CLOSE BATTERY COVER

Image 9

Contents GR-DVL9000 It is recommended that you Dear CustomerDV mark Safety PrecautionsDVM-30 M-DV30ME RM-V711UVIDEO/AUDIO cable Mini-plug 4RCA plugCD-ROM Sub-Code Area Video Area Audio Area ITI Insert and Tracking Information Area Contents Charging The Battery Pack Open Battery Cover Installing The Battery PackInsert Charged Battery Close Battery CoverAC Power Using The Power PackIndoor Use Attach to CamcorderSelect Operation Mode Date/Time SettingsInput Date and Time LCD monitorOpen LCD Monitor Loading/Unloading a CassetteOpen Cassette Cover INSERT/REMOVE TapeSET Recording Mode Recording Mode SettingSet depending on your preference Select DialGrip Strap Attachment Adjust LengthTripod Mounting Bottom of the camcorderAdjust Dioptre Dioptre AdjustmentShoulder Strap Attachment Attach Shoulder StrapInstalling The Battery Remote Control UnitRE-INSERT Holder FADE/WIPE Button pgOperation Mode Power Dial PositionFunction Display EN RecordingStart Recording Pull OUT Viewfinder or Open LCD MonitorStop Recording END RecordingPower lamp comes on Engage Still ModeRecording From The Middle Of a Tape Start SearchTime Code When blank portion is recorded on a tapeProper recording During shootingAdjust Brightness Tape Remaining IndicatorBrightness Control Select Dial ON/OFF buttonJournalistic shooting Interface ShootingTilt LCD Monitor Zoom Select Function Displaying The Date And Time During RecordingDissolves during 5 second mode recording Engage 5S ModeTo Take a Snapshot In The 5-Second Mode Scene 5-second recordingEngage SELF-TIMER Mode Self-TimerStop SELF-TIMER Recording END SELF-TIMER RecordingPro Snapshot Take PRO SnapshotPress the Progressive Button Snapshot Button Motor Drive mode Progressive ModeWhen you dont want to hear the shutter sound Frame Description of Progressive Scan CCDClose Recording Menu MenusRecording Menu allows you to set these functions Please refer to pages 32, 33 for detailsWide Mode REC Mode Recording modeDIS Digital Image Stabilizer Zoom Zoom magnificationAccess System Menu System MenuClose System Menu Return Sound signals can be sampled at 32 kHz or 48 kHzAccess FADER/WIPE Menu Accessmenu Manual Mode ItemTo Cancel FADE/WIPE Effects FADE/WIPE EffectsExample Fades and WipesFader White Example Wipe ScrollPicture Wipe/Dissolve Resume RecordingP and P of the Fader/Wipe Menu WH BK B W Random VariationsFade in or out with a black screen Fade in or out with a white screenFade out from colour to black and white ScreenDisappears New scene gradually appears as the old one graduallyNew scene wipes in over the previous one from the upper Right corner to the lower left cornerSelected mode appears Disable P.AE/EFFECTAE/Effects Press START/STOP. The image begins with the selected effectStrobe Classic FilmTwilight SepiaProgressive Video Recording Access Manual Focus Manual Focus AdjustmentAdjust Focus To Change To Auto FocusExposure Control Adjust ExposureBrightness control of the LCD monitor To Return To Automatic Exposure ControlIris Lock After , adjust the exposure rotatingTo Return To Automatic Iris Control IrisAccessment White Balance Adjust White Balance AdjustmentClosement White Balance Adjust Select Auto in . Or set the Power Dial toExit Manual White Balance Adjustment Enter SettingManual White Balance Operation To Change The Tint For RecordingRewind Tape Volume switchViewing Recording END PlaybackTo Perform High-Speed Search Press 2 or 3 after pressing 6/4. The tapeHigh-Speed Search. This is not a malfunction Activate Zoom Playback ZoomLocatescene Portion of Magnified END ZoomPlayback Effects Select P.AE/EFFECTRM-V711U Provided Playback Menu Access Playback MenuClose Menu Playback Menu allows you to set the following functionsPlayback Sound Displaying the Date During PlaybackDisplaying The Time Code During Playback VCR/TV Connection EN Playback Basic ConnectionsSelect TV’S Video Mode Turn on PowerConnection To a Personal Computer Supply PowerTo DV in connector Connection To a Video Unit Equipped With a DV ConnectorAC Power Adapter Charger Digital PrinterMake Connections DubbingStart Playback Pause RecordingDigital Dubbing Brand Setting Operate the VCR VCR Code ListRM-V711U 7 8 9 ` provided Execute FADE/WIPE in if Necessary Random Assemble EditingSET EDIT-IN Point SET EDIT-OUT PointUSE P.AE/EFFECT if Necessary Engagemode Vcrs RECORD-PAUSE Start EditingStop Editing Prepare for R.A. Edit Play Back Dubbed Scene For More Accurate EditingChoose a Scene Random Assemble Editing Menu appearsInput Correction Data Adjustment of VCR‘s against Camcorder TimingFind EDIT-IN Point Audio DubbingBegin Dubbing Pause During DubbingFind Edit OUT Point Insert EditingFind Edit in Point Pause During EditingDon’t work Tape END appearsFor editing was registered During Digital ZoomRed or black for an instant Mode is set to OFFWhen the LCD monitors Fluorescent light reaches LCD monitor. When This happens, the displayedThere are disturbances in audio and video Angle of the LCD monitorLCD monitor or Camcorder’s functions Same timeIf the indication remains Even though you repeatCleaning The Camcorder Pull this out to open Connector coverReset button pg External microphone input connector MIC Stereo pgOPEN/EJECT switch pg Power dial pgOUT S2 OUT connector pg Cassette cover pg DV OUT connector pg , 59Battery cover pg Battery cover open switch Battery pgFunction LCD Monitor/Viewfinder Indications During RecordingLCD Monitor/Viewfinder Indications During Playback Indications Function Avoid using the unit For safety, do notTo avoid hazard During useDo not leave the unit To prolong service lifeTo protect the unit, do not To prevent damage to the LCD monitor, do notPower consumption PowerSignal format Video signal recording formatAC Adapter Colour temperatureAuto focus On-screen displayAnimation Audio Dubbing Motor Drive Mode .................................. pgPg 35 Connections Pg , 56 59Memoen GR-DVL9000

Related manuals

Manual 92 pages 53.07 Kb