JVC GR-DVM96 instruction manual Other problems

							EN 85
	24.	Although Snapshot is	24. •The subject is too bright with		24. •Set “FLASH” to “ON” in
		attempted, flash does not take		the flash set to “AUTO” or		MANUAL Menu.
		place.		“AUTO C”.		( pg. 38, 47)
				•If blinks, the flash is being		•It can take up to 10 seconds
				charged.		to charge the flash.
				•The camcorder is in the		•Set the camcorder in the
				Record mode.		Record-Standby mode.
				•In the Menu Screen, “GAIN		( pg. 53, 54)
				UP” is set to “OFF” or		•Set “GAIN UP” to
				“r PROGRAM AE” is set to		“AUTO	” or “ACG”
				“TWILIGHT”.		( pg. 38, 45) or disengage
						the “TWILIGHT” mode.
						( pg. 38, 42)
	25. Although a Snapshot is taken		25. •The subject does not look		25. •The subject should look
		with the flash, Red-Eye		straight toward the flash.		straight toward the flash,
		Reduction does not take place.		•The subject does not look at		especially the first flash. If
				the first flash, which is an		the subject does not see the
				important part of Red-Eye		first flash, it will be difficult
				Reduction.		for Red-Eye Reduction to
				•The camcorder is too far		take place. ( pg. 54)
				from the subject.		•The flash is effective for
				•“FLASH” is not set to		subjects at a distance of
				“AUTO C” in MANUAL		approx. 0.7 m (2 ft) to 2 m
				Menu.		(6.5 ft) from the camcorder.
						( pg. 54)
						•Set “FLASH” to “AUTO C”
						to display the Red-Eye
						Reduction indicator.
						( pg. 38, 54)
Other problems
		SYMPTOM		POSSIBLE CAUSES		CORRECTIVE ACTION
	26.	The CHARGE indicator on the	26.	•The temperature of the	26.	•To protect the battery, it is
		camcorder does not light.		battery is extremely high/low.		recommended to charge it in
				•Charging is difficult in places		places with a temperature of
				subject to extremely high/		10°C to 35°C (50°F to 95°F).
				low temperatures.		( pg. 88)
	27.	“SET DATE/TIME!” appears.	27.	•The built-in clock’s	27.	•Connect the camcorder to an
				rechargeable lithium battery		AC outlet using the AC
				is discharged.		Adapter for over 24 hours to
				•The previously set date/time		charge the clock’s lithium
				is erased.		battery. ( pg. 15)
	28.	There is no picture.	28.	•The camcorder is not getting	28.	•Turn the camcorder’s power
				power, or some other		off and on again. ( pg. 14)
				malfunction exists.
	29.	Some functions are not	29.	•The Power Switch is set to	29.	•Set the Power Switch to “M”.
		available using the MENU		“A”.		( pg. 14)
		Wheel.
	30.	Files stored in the memory	30.	•Files stored in the memory	30.	•Remove protection from the
		card cannot be deleted.		card are protected.		files stored in the memory
						card and delete them.
						( pg. 31 – 33)

CONTINUED ON NEXT PAGE