JVC GR-DVM76 Blank Search, Slow-Motion Playback Playback Zoom Playback Special Effects

BLANK SEARCH

				EN 23
Blank Search	6 Rotate the MENU
		BLANK	SRCH
	Wheel to select
Helps you find where you should start recording in
	“BLANK SRCH”, and
the middle of a tape to avoid time code interruption.	press it. The Sub	BLANK SRCH – CANCEL
( pg. 21)	Menu appears.
				EXECUTE

Stop Button (8) VIDEO/MEMORY Switch

Power Switch

AY OFF A	M
PL

MENU Wheel Lock Button

1Load a cassette. ( pg. 16)

2Set the VIDEO/MEMORY Switch to “VIDEO”.

3Set the Power Switch to “P” while pressing down the Lock Button located on the switch.

7 Rotate the MENU 5

Wheel to select “EXECUTE”, and press it.

●The “BLANK SEARCH” indication appears blinking and the

camcorder automatically starts reverse or forward search, then stops at the spot which is about 3 seconds of tape before the beginning of the detected blank portion.

●To cancel Blank Search midway, press 8.

NOTES:

● In step 7, if the current position is at a blank

portion, the camcorder searches in the reverse

direction. If the current position is at a recorded

portion, the camcorder searches in the forward

direction.

● Blank Search does not work if “HEAD CLEANING

REQUIRED. USE CLEANING CASSETTE” has

appeared with the tape.

● If the beginning or end of the tape is reached

4Press the MENU Wheel in. The Menu Screen appears.

5Rotate the MENU Wheel to select “t VIDEO”, and press it. The VIDEO Menu appears.

V I DEO	SOUND MODE
SYSTEM	12B I T MODE
D I SPLAY	SYNCHRO
	REC MODE
	BLANK SRCH
		COPY
END

during Blank Search, the camcorder stops

automatically.

● A blank portion which is shorter than 5 seconds of

tape may not be detected.

● The detected blank portion may be located

between recorded scenes. Before you start

recording, make sure there is no recorded scene

after the blank portion.

Slow-Motion Playback

Playback Zoom

Playback Special Effects

Available only with the remote control (provided). ( pg. 68, 69)