JVC GR-DVM76 instruction manual Audio Dubbing Using Digital Sound Effects GR-DVM96 only

EN 71

Audio Dubbing Using Digital Sound Effects (GR-DVM96 only)

D.SOUND Button

MENU Wheel

Remote sensor

A.DUB

PLAY

PAUSE

STOP

1Load the provided memory card. (
pg. 17) Then, perform step 1 and 2 on page 70.

2Press the MENU Wheel in. The Menu Screen appears.

3Rotate the MENU Wheel to select “s SYSTEM”, and press it. The SYSTEM Menu appears.

4Rotate the MENU Wheel to select “SOUND IN”, and press it. The Sub Menu appears.

5	Rotate the MENU		9D
	Wheel to select		D.SOUND
	“D.SOUND”, and
6	press it.
	Rotate the MENU	APPLAUSE
	Wheel to select

“BRETURN”, and press it twice. The

Menu Screen closes and the sound effect indication appears.

7Press INDEX to access the sound effects Index Screen.

8Rotate the MENU Wheel to select the desired sound effect and press it.

9Press PLAY (U) to begin Audio Dubbing. The selected sound effect is dubbed onto the tape.

●The “ ” moves while it is being dubbed.

●To stop dubbing the sound effect midway, press D.SOUND.

10Press STOP (8) to end Audio Dubbing.

NOTES:

●After dubbing, set “SOUND IN” back to “MIC”.

●The dubbed sound effect is recorded on SOUND 2. (
pg. 51)

●If you press PAUSE (9) to pause dubbing in step 9 the selected sound effect indication remains displayed. To resume dubbing, press PLAY (U).